Tianjin Mikim Technique Co., Ltd. |
|
cheap small can move Good crushing effect tree branch shredder Spot sales
Friendly reminder of Smallmobile wood chipper
Dear friend, if this model chipper is not suitable for you, don't worry,
Leave me a message at the bottom, tell me your detail requirement.Trust me ,you will get the most suitable product and price .
MATTERS NEED ATTENTION
I. Gasoline, oil separate use: this power for four-stroke gasoline
engine, gasoline, oil separate use. Gasoline use 90
2. injection machine oil: oil is the key to use the machine, no
injection machine oil is strictly prohibited to start, check the
oil level before each use. In order to strictly press the oil gauge
injection, must use the oil control in the diagonal range
between the line and the line, with the line level. More oil will
cause exhaust pipe smoke discharge, engine overheating, air filter
is easy to be choked by oil wet, affecting machine horsepower,
serious will make the filter can not enter the air, resulting in
the machine can not ring. Too little oil, lower than the line, will
cause the machine to pull the cylinder, serious
will cause the connecting rod broken, cylinder block damage. Oil is
recommended to use brand name oil.
3.Three regular change of oil: the new machine before use should be
low speed idling 20 minutes running-in, after 5 hours of use,
must change the new oil. The method is to first ring the machine
for a few minutes and then stop (change the oil in the hot
machine state clean and thorough), tilt the whole machine in the
direction of the oil ruler, or release the oil with the tool
loosening the oil screw at the bottom of the oil ruler. Change the
oil every 50 hours later.
4. Air Filter: Clean the air filter every 8 hours. Paper air filter
should be replaced every 50 hours.
5;. spark plugs: the spark plugs should be cleaned up once a year
to accumulate carbon, should be replaced every year.
6. use safety: before use, should first clean the grass brick,
angle iron and other foreign bodies. It is strictly forbidden to
move around with a radius of 15 meters. Do not fill the room with
gasoline, the spilled gasoline should be wiped clean. Don't smoke
at work. Wear protective clothing and glasses
7. blade sharpening and balance: blade in use for a period of time, such as knife edge should not be sharpened. Pay attention to the balance on both sides of the blade, tighten and fix the blade screws.
Model | 7.5HP | 13 HP | 15HP |
Motor | 170 | 188 | 190 |
Displacement | 212cc | 390cc | 420cc |
Power | 4kw | 7.4kw | 8.2kw |
Cutter diameter | 76mm | 89mm | 100mm |
Engine type | 4 stroke | 4 stroke | 4 stroke |
Starting system | Recoil | Recoil | Recoil |
Fuel consumption | 1.5L/h | 4L/h | 4L/h |
Weight | 88kg | 175kg | 180kg |
FAQ
1. Are you manufacturer or trade company?
A: We are manufacturer, we have our own factory. Our factory has
department for exploitation , producing, sales, after-sell service,
packing , warehouse, we can offer you best products and best
service.
2. Do you sell accessories for your machine?
A: Yes, all of match accessories for our machine are on selling, we
are willing to supply the match parts to you with low price.
3. What about Payment term?
A:T/T(Telegraphic Transfer ) --30% as prepayment by T/T, after seen
the copy of the B/L sent by fax, the balance of 70% should be
effected.