Hefei Smartmak Co., Ltd. |
Verified Suppliers
|
|
Luxury Traditional Steam Wooden Indoor Electric Heater Sauna Room for 3 Person
What Are the Differences Between Saunas and Steam Rooms?
All saunas and steamrooms share a number of health benefits in different proportions depending on the heat source and level of humidity (water in the air), length of exposure and your overall health and fitness, such as:
Traditional Dry Saunas
Traditionally, saunas are used to provide a dry hot
heat with low humidity in a wooden room, usually cedar, aspen or
spruce.
Temperatures range between 78-90°C (180-195°F), though many are
content to get in their sauna at 140°F while it gets hotter. Sauna
bathers like set-off a blast of moist heat by pouring water over
hot rocks creating steam. This results in a temperature of 160 to
200 degrees Fahrenheit and humidity of 5 to 20%. The most
traditional heaters are wood-burning, but the convenience of
electrical and gas heaters are wonderful and bring a new meaning to
"firing up the sauna"
Steam Rooms
Steam rooms are quite different. A steam room differs
from a sauna in two ways: humidity and lower ambient heat. The
lower temperature of the steam room may be more tolerable to some
people who may not enjoy the sauna.
They are not as hot with temperatures of 110 to 114 degrees Fahrenheit, and humidity at or near 100%, with water dripping down the walls. Because of the high humidity, they must be constructed of tile, marble or acrylic, and all the fixtures must be made of stainless steel, brass, plastic or other rustproof material. The ceiling and benches should be sloped, so the water will run off, and there must be a drain in the room, which must not leak steam or water into the outside area. The steam generator is located outside the steam room, nearby, and requires plumbing from the water supply (preferably hot water) and from the generator to the steam room, as well as electrical wiring to the generator.
Specification:
Applications: Apartment, Hotel, Villa, Home, Indoor and and So On.
FAQ:
Q: Are you a trading company or a manufacturer?
A: We are a manufacturer as you can see our workshop as above.
Q: How does your factory do regarding quality control?
-Establish quality standards for each product
-The quality standard training will be conducted to the employees
once a month,Two quality trainings for quality inspectors
-The quality inspection department will check the products at any
time during the production process
-Each sauna will be tested for more than one hour
-Defective products found during testing will be repaired,To ensure
that all products are perfect before shipment
Q: Do you accept OEM or ODM order?