303 Stainless Steel Material Self Tapping Threaded Inserts For Plastic M6

303 Stainless Steel Material M6 Self - Tapping Thread Insert For Plastic

Product Application

1. Flight Inserts give high strength joints in low strength materials. Typical applications are transmission housings, electronic equipment and suspension units. Available in inch and metric thread sizes, the stainless steel solid bushing configuration of the Flight Insert guarantees the quality of the internal thread before installation. No special tools are required for installation and standard taps and drills are used for hole preparation. The Flight self-broaching keys set the insert to depth and ensure positive resistance against rotation.Flight Inserts give high strength joints in low strength materials. Typical applications are transmission housings, electronic equipment and suspension units.
2. Available in inch and metric thread sizes, the stainless steel solid bushing configuration of the Flight Insert guarantees the quality of the internal thread before installation.
3. No special tools are required for installation and standard taps and drills are used for hole preparation.

Details

Threaded Inserts are cylindrical, metal bushings with features on the outside which lock them into a plastic or metal base material to anchor your fasteners. Our Threaded Inserts provide high-quality, permanent, wear-resistant internal threads and are designed to be installed in molded or drilled holes in one simple step. While each style performs in a range of materials, they are generally classified by method of installation: Thread-Cutting, Thread-Forming, Push-In, or Ultrasound.

The advantages of self-tapping threaded sleeve:

• Sets of self tapping screw self tapping, base material without prior tapping, save costs.
• And finished product contact surface is large, bear a strong pull, product design can
• use the lower strength of the material.
• For wear or break has teeth with female thread repair,
• self-tapping threaded sleeve can continue to use the same screw.
• Strong resistance to vibration, can prevent loosening.
• With no residual gap of the base metal, the mother material also has good air tightness when the bubble is contained.
• Self tapping threaded sleeve installation is simple, rapid, only an assembly tool, low cost, almost no adverse rate.

Self-drilling screw installation method:

Step1: Proper the hole by molding or drilling, the hole size is recommended, and may adjusted after that test , It is better to countersink the hole.

Step2: Screw the inserts onto the installation tool with the cutting slot or cutting bore downwards , then put the insert into the hole and begin.

Step3:The insert is supposed to arrive at 0.2mm lower than the workpiece top surface, then tighten the hexagonal nut of the installation tool with a wrench and back out the tool counter clock wise.

Note: The insert is to be vertically aligned with the hole axis,do not tilt during tapping. Observe the first 1-2 pieces tapping , if any tilt found , stop tapping and re-align the insert. Never reverse the tool when tapping is in progress.

Packaging & Shipping

PP bag; plastic box; wooden box; carton..

Sample 1-3 working days can be ship out (Not including customize) bulk order take 7-10working days.

By Express: We suggest DHL, UPS, TNT, Fedex, EMS, and so on.

if you have special required,  just mail us.

Why choose us?

Quick Response:Your Enquiry will be replied within 24 hours,  Always best service.

High Quality:High quality is our slogen, In the industry there are more than 23 years of experience.

Reasonable Price:Directly from the factory to save your money.

Short Lead Time:1-3 days for samples and 7-10 days for bulk quantity orders.

Welcome OEM:Custom made according to your drawings , samples or designs.