Diameter 100 mm 22 roller two groups of traction wire Straightener
380 Volt voltage
Wire Straightener Straight Solid line 10-13 mm
Straightener: a device involved in straightening the wire before it
is processed is the last piece of the finished wire. It acts as a
straightener, but its role is not only straightening the wire.
Straightener: A device for straightening steel wire before it is
processed. Heating and straightening can meet the requirements.
Straightening is the process of plastic deformation. The
straightener on the laminar generally has 7 rounds or 9 rounds.
Each three wheels can be seen as two edges with sloping plates. The
longitudinal section shape of the static rubbing plate, its groove
depth is from the depth to shallow and finally disappeared. Its
working principle is that the pressure drop gradually decreases, so
it can also be adjusted very straight. Its disadvantage is the
reciprocating movement of the rubbing board, there is a blank
course, and the production efficiency is not high enough. Although
it is possible to use the emergency effect of the biased crank
slider mechanism shown to reduce the space loss, due to the high
quality of the moving rubbing board and the reciprocating motion,
the inertial force generated by it is not easy to balance, which
limits the improvement of the machine's operating speed. Therefore,
productivity is still not ideal.
2) Planetary roll straight. The straightening machine's moving
plate becomes a roller, which makes a continuous rotation movement.
The static plate becomes an arc member, and the upper slot is also
shallower and eventually disappears. This scheme not only corrects
the rods very straight, but also has a high degree of automation
3) Roll the rod with a flat press. The advantage of this method is
that it is simple and easy to use. The disadvantage is that the
material is not straight because of the rebound of the material.
4) Roll the bar with a slot press. Taking into account that
"correction must be too positive", the static rubbing board is made
into a shape with a slot, and the cross section of the moving and
static rubbing board is made. In this way, it is possible to
straighten the bending rods, but it is also possible to bend the
straight rods. It is not ideal.
5) Straighten with a pressure bar. A similar mechanical device is
designed. The straightening machine passes through an electric
motor. On the one hand, the rod material is rotated. On the other
hand, the pressure drop of the pressure rod is gradually reduced
through the cam to achieve the purpose of straightening. Its
advantage is that the rods can be adjusted very straight; The
disadvantage is low productivity, loading and unloading rods need
Copper Tube Straightening Machine Parameter:
Straightener line Specifications: 10-13 mm
Straightener line material: low, medium and high carbon steel wire,
copper wire, tungsten molybdenum wire, welding wire, wire, etc.
Straightener wheel diameter: Φ100 mm
Straightener wheel groove type: V groove, R groove
Straightener wheel Quantity: 22 rounds
Straightener line form: single group: horizontal straightener;
combination: vertical + horizontal or pneumatic alignment.
Straightener wheel is adjusted to: integral integral opening +
single alignment wheel independent movement adjustment
Wire straightener Total quality: bare metal 9 KG, even packaging
Wire straightener size: 18 wheels, two pieces: length 398mm × width
130mm × height 130mm
Copper Tube Straightening Machine details:
|Machine roller Diameter||47mm|
|Length * width * height||350 mm × 120 mm 120 mm|
|Weight||9kg (not including the wooden box )|
|Distance to install screw holes||85 mm|
|Distance between two wheels||26 mm|
|Roller thickness||7 mm|
|Mounting roller screw diameter||7 mm|
Product show :