Top Fencing Co.Limited |
|
Flat top & bottom security tubular steel fencing :
Product brief introduction
Design: Safe Security Fencing
Applications: Security Fencing & Gates
Std Heights: 1.5m, 1.8m, 2.1m
Std Widths: Panels 2.3m Gates 1.2m, 2m
Custom sizes available.
Materials: Pregal steel- welded then powder coated for Australia's
harsh conditions.
1. Heavy duty Crimp top security fence in Black colour only
2. Width 2400mm x Height 2100mm Crimp top diamond shape
3. 40x40x1.6mm top rail, 19OD, 20OD Verticals
4. 60x60x2mm thick post - these are 3m long each not 2.6m long as others supply.
5. Normal fence powder coated brackets
6. Security fence brackets ( powder coated )
7. Caps for 60x60 posts (powder coated )
8. Phosphate treated before powder coating (Very Important) - Not many suppliers even know about this process.
9. All panels are fully protected
Product detailed introduction
1) Our panels are made out of the thicker material top and bottom rails 40x40x1.6 and 19OD or 20OD for all verticals
2) The gap in between the verticals is 110mm compared to wider gaps with others.
3) We use for all our panels galvanized material only.
4) Very important is that we phosphate wash our panels before powder coating which means a very high-quality powder coating which will long last many many years compared to my competitors.
Usages:
Widely used in villas, community, gardens, schools, factories and
other flower beds, lawns, industrial and mining enterprises,
financial institutions, sports stadiums, convention centers,
squares, roads, balconies, residential use, its flowing lines,
simple and beautiful and full of rich modern residential sensual,
garden Light, villas era of high-grade. Simple installation, easy
maintenance, easy to clean, affordable, eliminating maintenance.
Common specification:
Rail(mm) | Picket(mm) | Center space(mm) | Post(mm) |
32*32*1.2 40*40*1.2 45*45*1.2 32*32*1.0 40*40*1.0 45*45*1.0 | 16*16*1.0 19*19*1.0 25*25*1.0 16*16*0.8 19*19*0.8 25*25*0.8 | 116 124 130 116 124 130 | 50*50*1.5 60*60*2.0 80*80*2.0 |
Note: Special specification is available at your request
Welded:
1>Cut Shot
2>Welded
3>Acid-Washing
4>Rich-Zinc Powder Coating
5>Polyester Color Powder Coating
6>packing
The main manufacture process:
Assembled:
1>Cut Shot
2>Punching Holes
3>Acid-Washing
4>Rich-Zinc Powder Coating
5>Polyester Color Powder Coating
6>Assembly
7>packing