Top Fencing Co.Limited |
|
Gauge diameter | Hole shape | Mesh width | Suited blade specifications |
100mm×100mm | Square hole,diamond | 1.2m ~ 2.4m | BTO-10.12.18.22.28.30, CBT-60.65 |
100mm×150mm | Square hole,diamond | 1.2m ~ 2.4m | BTO-10.12.18.22.28.30, CBT-60.65 |
100mm×200mm | Square hole,diamond | 1.2m ~ 2.4m | BTO-10.12.18.22.28.30, CBT-60.65 |
150mm×300mm | Square hole,diamond | 1.2m ~ 2.4m | BTO-10.12.18.22.28.30, CBT-60.65 |
(other nets hole can according to customers' special needs) |
SPECIFICATIONS | DESCRIPTIONS | |
(A) Razor Weld mesh panel | The Razor Weld Mesh panel would be made with Medium Blade Profile
Razor Tape | |
Core Wire | Horizontal wire, Dia 2.5mm (+/- 0.05mm) ; min 0.5mm (+/-0.05) thick
tape | |
Razor Tape | min 0.5mm (+/-0.05) thick tape | |
Mesh Size | Mesh Size of 75 X 150mm with mesh opening pf diamond/rhombus shape | |
Panel size | 2500 x 955mm | |
Metallic Coating | Core wire : 2.5 (+/-0.05)mm Hot dipped GI (min 275 gsm); Razor
Strip sheet: 0.5 (+/-0.05)mm Hot dipped GI (min 275 gsm) | |
Note | Three panels to be used to get a vertical height of 2700mm | |
(B) Concertina coil | 1050 mm Dia / 56 turns/ 2.5 mm core wire. | |
Coil Diameter | 1050 mm | |
Type of Strip | Hot Dipped GI (min 275 gsm) | |
Type of Core wire | Hot Dipped GI (min 275 gsm) | |
Core wire Diameter | Min 2.5 mm | |
Material | Hot Dipped GI (min 275 gsm) | |
Weight | 15.2 ± 5% | |
Number of turns | 56. | |
Length when stretched | 10-12 m | |
Blade profile | Tear Blade | |
(C) Fence Post | ||
Type | Circular Hollow | |
Material | MS steel Tube (IS 1161). | |
Dimensions | 76mm Dia, 3.2 mm ( +/- 10%) Thickness. | |
Length | 3345mm (+/- 5%) (2745 mm above ground level + 600 mm under the
ground level). | |
Powder Coating | Hot Dip galvanized to minimum 350 GSM as per IS 2629/ IS 4759/ASTM
A 123 | |
Holes | Suitable holes of proper size to match the mounting of the clamps
to be provided | |
(D) Clamps | To tighten the mesh panel along the post with GI strip 50 x 5 x
2700mm with 9 holes will be provided.Along with the clamp 9no of
Mushroom Head Bolt (M8X120) with breakable head safety nut and
washer (Material: SS 304, OD : 15.89mm, ID : 8.38mm, thickness ;
2.04mm.) will be provided. | |
Coating | Hot dip galvanized | |
(E) | Y-Arm | |
Material | MS Angle Size: 50x50x5 mm. | |
Length | 750 mm of one arm. | |
Coating | Hot dip galvanized to 350 GSM Hot Dip Galvanizing as per IS 2629 /
IS 4759 /ASTM A 123 | |
Outer diameter | 63 mm of sleeve cap, Bolted on the top of the fence post. Straining
post will be installed at every 30 meters. | |
Accessories for fitting Y Arm | Mushroom Head Bolt with breakable head safety nut (M8X120) (2 Nos
per post) | |
Material | MS, IS 2062, galvanized | |
(F) Razor Blade Tape | ||
Material | Hot Dipped GI (min 275 gsm) | |
Core wire Diameter | 2.6 ± 0.035 mm Dia. | |
Blade profile | MBBT | |
(G) | Anchor Rod | 10 mm dia 300 mm long GI Rod tie with fence post at bottom using
tie wire. (01 nos for each post) |
Sl.no | RAZOR WELD MESH | UOM | QTY |
1 | Razor Weld Mesh Panel with Accessories | NOS | 3 |
2 | clamps | NOS | AS REQUIRED |
3 | Mushroom Head Bolt Nut with Washer For fitting Razor panels | NOS | AS REQUIRED |
4 | Fence Post | NOS | AS REQUIRED |
5 | Y- Arm | NOS | 1 PER POST |
6 | Accessories for fitting Y Arm: Mushroom Head Bolt with breakable head | NOS | AS REQUIRED |
9 | Punched Tape Concertina Coil | COIL | AS REQUIRED |
10 | Razor Blade Tape | RIM | AS REQUIRED |
11 | Anchor Rod | NOS | 1 PER POST |