Home Companies Top Fencing Co.Limited

DIN488 GERMAN STANDARD Weld Rebar Reinforced Wire Mesh For Construction Site

Active Member

Contact Us

[China]

Address: ADD: Postcoade 053600 B125-B135 Ziwu Indutries Zone Zi Wen Town Anping County Hengshui Heibei Province China

Contact name:Frank.Zhang

Top Fencing Co.Limited

DIN488 GERMAN STANDARD Weld Rebar Reinforced Wire Mesh For Construction Site

Country/Region	china
City & Province	hengshui hebei
Categories	Steel Wire Mesh

Product Details

DIN488 GERMAN STANDARD Weld Rebar Reinforced Wire Mesh For Construction Site

Welded mesh reinforcingis a convenient and cost effective alternative to conventional bar reinforcement for the following reasons :

1.The mesh is generally specified and manufactured according to standard references making for easy site identification, quality control and management.

2.The mesh is manufactured in sheets or rolls resulting in a quick and simple site installation process.

Although generally used in surface beds (concrete floor slabs on fill) and concrete roads, mesh can also be used in suspended floor slabs, concrete walls, culverts / drains and composite brick / concrete retaining walls.

Reinforcement mesh is a welded wire fabric, prefabricated steel reinforcement material. It has a rectangular or square reinforcement mesh grid pattern and is produced in flat sheets.

Wire diameter	3mm-16mm
Material	Low carbon steel rod
Length	1m-12m or as per customized
Width	0.5m-3m
Usage	Road, bridge and tunnel,building
Hole shape:	Rectangle,Square
Mesh opening:	100--400MM
Features	High tension strength

Product Description

BS44B3 BRITISH STANDARD

Ref NO.	Stand Unit	Longitudinal Wires mm	Cross Wires mm	Pitch of wire mm	No.of sheet per ton	Mass Kg/m2
A393	sheet	10	10	200@200	15	6.16
A252	sheet	8	8	200@200	22	3.95
A193	sheet	7	7	200@200	29	3.02
A142	sheet	6	6	200@200	40	2.22
A98	sheet	5	5	200@200	57	1.54

Steel Concrete Reinforcement panel brc reinforcement mesh a393

AS/NZ 4671:2001 Australia/New Zealand Standard

Ref No.	Stand Unit	Longitudial Wires (mm)	Edge Wires (mm)	Cross Wires (mm)	Mass (Kg)
SL81(F81)	Sheet	7.6@100	7.60@100	7.60@100	105
SL102(F102)	Sheet	9.5@200	6.75@100	9.50@200	80
SL92(F92)	Sheet	8.6@200	6@100	8.60@200	66
SL82(F82)	Sheet	7.6@200	5.37@100	7.60@200	52
SL72(F72)	Sheet	6.75@200	4.77@100	6.75@200	41
SL62(F62)	Sheet	6@200	4.77@100	6@200	33
SL52(F52)	Sheet	4.77@200	4.77@100	4.77@200	21

Steel Concrete Reinforcement panel brc reinforcement mesh a393

TRENCH MESH

Ref NO.	Unit	NO. wires	Main Wire mm	Cross wire mm	Mass(kg)	Dimensions
L8TM200	Sheet	3	7.6@100	4.0@300	6.8	6 x 0.2M
L8TM300	Sheet	4	7.6@100	4.0@300	9.2	6 x 0.3M
L8TM400	Sheet	5	7.6@100	4.0@300	11.6	6 x 0.4M
L11TM200	Sheet	3	10.7@100	4.75@300	13.3	6 x 0.2M
L11TM300	Sheet	4	10.7@100	4.75@300	17.7	6 x 0.3M
L12TM200	Sheet	3	11.9@100	4.75@300	15.8	6 x 0.2M
L12TM300	Sheet	4	11.9@100	4.75@300	21.2	6 x 0.3M

Steel Concrete Reinforcement panel brc reinforcement mesh a393

Packing details:

1. Packed in bundles, pallet or as the customers' request

2. 5-10 days for one 20' container

Shipping:

Samples will be shipped by express service - DHL, EMS, UPS, TNT or Fedex.

1, By counier, like DHL, PUS, Fedex, dtc. Usual 5-7 days;

2, By air to the air port, usual 3-5 days arrives;

3, By sea to the sea port, usual 25-45 days.

Reinforcing mesh is a welded wire fabric, prefabricated steel reinforcement material. It has a rectangular or square grid pattern and is produced in flat sheets.

The fabric is used to provide tensile strength and crack control to structural concrete elements.

Welded Wire Mesh Panel is made of superior quality welded mesh, with flat even surface, firm structure, be used extensively in building, food, agriculture and so on.

Wire Materials: High quality mild steel wire, stainless steel wire, galvanized steel wire, hot-dipped zinc plating iron wire, PVC wire
Process: Galvanized after weaving or galvanized before weaving.
Finish: Electric galvanizing, hot-dip zinc plating, stainless steel or PVC coated.
Wire Diameter: 2mm-14mm
Wire Dia: BWG8-24
Mesh: 5/8"-2"
Width: 0.5-3m
Longth: 10M-50M

General Use: Welded Wire Mesh with excellent corrosion resistance and oxidation resistance, is extensively used as fencing, decoration and machinery protection material in agriculture, construction, transport, mine, sports field, lawn and various industrial fields.

Reinforcement Rebar Welded Wire Mesh Specifaication

Diameter(mm)	Aperture (mm)		Width(m)	Length
Diameter(mm)	Inch	MM	Width(m)	Length
2.0mm-3.2mm	1"	25.4	0.914m-1.83m	The length does not limit
2.0mm-4.5mm	2"	50.8	0.914m-2.75m
2.0mm-6.0mm	3"	70.2	0.914m-2.75m
2.0mm-6.0mm	4"	101.6	0.914m-2.75m
2.0mm-6.0mm	5"	127	0.914m-2.75m
2.0mm-6.0mm	6"	152.4	0.914m-2.75m
2.0mm-6.0mm	7"	177.8	0.914m-2.75m
2.0mm-6.0mm	8"	203.2	0.914m-2.75m

Diameter(mm)	Aperture (mm)		Width(m)	Length
Diameter(mm)	Inch	MM	Width(m)	Length
2.0mm-3.2mm	1"	25.4	0.914m-1.83m	3Feet x 6Feet 4Feet x 8Feet 5Feet x 10Feet 1M X 2M 1.5M X 3M 2M X 4M Other panel sizes can also be made according to request The length does not limit
2.0mm-4.5mm	2"	50.8	0.914m-2.75m
2.0mm-6.0mm	3"	70.2	0.914m-2.75m
2.0mm-6.0mm	4"	101.6	0.914m-2.75m
2.0mm-6.0mm	5"	127	0.914m-2.75m
2.0mm-6.0mm	6"	152.4	0.914m-2.75m
2.0mm-6.0mm	7"	177.8	0.914m-2.75m
2.0mm-6.0mm	8"	203.2	0.914m-2.75m

Technical Info: Wire diameter for welded steel bar panel ranges from 5mm to 16mm. Welded bar panel opening: 75mm to 300mm. Panel length: 100cm to 1400cm. Panel width: 100cm to 300cm.

SL52,SL62/SL72/SL82/SL92/SL102 reinforcing mesh And so on

Reinforcement Rebar Welded Wire Mesh Features

Steel bar grating costs less time and labor in work. It saves about 50 to 70 percent work time compared with common binding wire mesh. The use of bar grating can also strengthen the concrete parts to reduce surface breaking ratio. Welded bar grating for reinforcement is especially suitable for big area concrete engineering. Using of welded bar reinforcement can save about 10 percent of the total cost of the project.

1. The steel bar has a ribbed profile surface. This ribbed profile creates improves bonding to concrete, which when compared to smooth wire profiles, minimizes any concrete cracking that may occur as a result of concrete shrinkage.

2. Compared with common binding wire mesh, wire mesh reinforcement can save labor and time. And the reinforcing mesh is especially suitable for big area concrete engineering.

Reinforcement Rebar Welded Wire Mesh Applications

Steel bar welded grating is well received and popularly used as a kind of new, efficient and excellent quality concrete structure steel materials in various industrial and civil buildings. It is mainly used in making of floors, ceilings, wall body, concrete road, bridge surface, airport, tunnel lining, concrete piping, etc.

1. Concrete footpaths

2. Precast Panel construction

3. Construction reinforcement

4. Residential slabs and footings

5. Industrial and commercial ground slabs

6. The ground for tunnel, bridge, highway, airport and wharf, also in construction of wall body

We offer heavy type welded wire mesh panels including steel bar welded wire mesh. This company specializes in producing steel bar welded mesh for reinforcement as top manufacturer of welded bar grating in North China. Our products have high precision, small difference and good quality. Steel bar welded grating is a kind of mesh type bar grating with the vertical and horizontal bars respectively welded together to a certain pitch and arranged at right angles to each other.

AS/NZS 4671:2001 Australia/New Zealand Standard (SIZE:6000mmX2400mm)
Ref No.	Std Unit	Longitudinal Wires mm	Edge Wires mm	Cross Wires mm	Mass Kg
SL81 (F81)	Sheet	7.6 @ 100	7.60 @ 100	7.60 @ 100	105
SL102 (F102)	Sheet	9.5 @ 200	6.75 @ 100	9.50 @ 200	80
SL92 (F92)	Sheet	8.6 @ 200	6 @ 100	8.60 @ 200	66
SL82 (F82)	Sheet	7.6 @ 200	5.37 @ 100	7.60 @ 200	52
SL72 (F72)	Sheet	6.75 @ 200	4.77 @ 100	6.75 @ 200	41
SL62 (F62)	Sheet	6 @ 200	4.77 @ 100	6 @ 200	33
SL52 (F52)	Sheet	4.77 @ 200	4.77 @ 100	4.77 @ 200	21

Packaging & Shipping

1.Steel wire tied up bundles; 2.wood or iron pallets 3.band iron frame pallets

Our workshop

Concrete Reinfocedire Mesh Panel rebar Welded wire Mesh

REF	PITCH OF WIRES		DIAMETER OF WIRE		CROSS SECTION AREA		DIMENSION OF MESH		ARER OF MESH	MASS	WEIGHT OF MESH
NO.	spacing mm		dia mm		dia mm2		sheet mm		SQm	weight	Mesh Weight
item	long	Cross	long	Cross	long	Cross	long	Cross	MM2	kg/m2	kg/pcs
Q131	150	150	5.0	5.0	131	131	2150	5000	10.75	2.091	22.476
Q188	150	150	6.0	6.0	188	188	2150	5000	10.75	3.014	32.401
Q221	150	150	6.5/5	6.5	221	221	2150	5000	10.75	3.136	33.707
Q295	150	150	7.5/5.5	7.5	295	295	2150	5000	10.75	4.116	44.245
Q378	150	150	8.5/6	8.5	378	378	2150	6000	12.90	5.167	66.659
Q443	150	100	6.5d/6.5	7.5	443	442	2150	6000	12.90	6.073	78.337
Q513	150	100	7d/7	8.0	513	503	2150	6000	12.90	6.974	89.970
Q670	150	100	8d/8	9.0	670	636	2150	6000	12.90	8.949	115.438
R378	150	250	8.5/6	5.0	378	78	2150	6000	12.90	3.306	42.644
R443	150	250	6.5d/6.5	5.5	443	95	2150	6000	12.90	3.892	50.209
R513	150	250	7d/7	6.0	513	113	2150	6000	12.90	4.540	58.576