Flat Steel Plate Design Crowd Control Barriers 1100mm x 2200mm OD
25mm x 2.0mm upright OD 19x1.2mm spacing 200mm
2.2 M × 1.1 M CROWD CONTROL BARRIERS
Crowd control barriers, effective and necessary crowd control management system in almost
all private and public events, including concerts, demonstration,
bicycle race and construction sites. It can keep order pedestrian
and vehicle passing and prevent tripping and stampede accidents. The crowd control barriers are available in various specifications,
you can choose them according to your requirements.
NCCB-01: 10 uprights 2.2 m × 1.1 m crowd control barrier.
NCCB-02: 18 uprights 2.2 m × 1.1 m crowd control barrier.
CROWD CONTROL BARRIER PANELS
The crowd control barrier panels are constructed of outer frames,
infill uprights and interlocking system. The outer frame and infill
uprights are constructed of steel pipes and the interlocking system
are manufactured from steel plates and steel rods.
Steel pipe material for high strength and impact resistance.
Inserted uprights before welding for durable and firm structure.
360° full hand welding for optimum strength.
Hot dipped galvanised or powder coated for outdoors.
Hook and loop interlocking system prevent barrier from being
damaged from the middle.
Flexible structure to form different passage way for different use.
CROWD CONTROL BARRIER FEET
Fixed feet.
Removable flat T feet.
Removable bridge Y feet.
Removable wheel feet.
Fixed or removable feet options.
Bolt-down design optional for higher stability.
Different sizes of bridge feet for easy installation on corners.
Considerate flat design for reducing tripping hazards.
Removable feet for easy stacking and storing.
Fastening pins & hardware to prevent being stolen.
Wheel design for smooth and easy operation or can be used as
barrier gate.
APPLICATIONS
Construction site.
Demolition site.
Public traffic.
scenic area.
Bike rack barricades
Sport fields.
Concert.
Demonstration.
Overall Length: 2600mm(2550when interlocked) or as stipulated
Overall Height: 1100mm or as stipulated
Weight: 19.5kgs ± 1kgs
Material: Steel tube.
Main Frame:
Outside perimeter (mainframe) is made of 38mm diameter galvanized
steel tubing, minimum 1.6mm thickness(after coating). The outer
frame is a single length of tubing without welds or deformation.
The pipe is bent at right angles with a minimum of smooth
deformation. Horizontal and vertical bars are at right angles to
the overall frame.
Grill: 21 equally-spaced bars inside vertical members, made of 13mm
out diameter galvanized steel tubing, minimum 1.2mm(after
coating),21 interior bars are 98mm apart, O.D. to O.D.
Locking: Male-Female interlocking ends. Units join and unlock at
one position (30 degrees). The male interlocking device is a
minimum 16mm diameter rod welded through mainframe at both ends.
Male/Female connections have enough clearance to allow for uneven
ground, a minimum of 13mm on top and bottom when connected.
Feet: flat foot detachable
Finish: Entire panel is hot-dip zinc-galvanized after welding (not
spraying, not use galvanized tube welding then spraying since on
welded points). Every barrier is filed after galvanizing so that
burrs from galvanizing are filed smooth and there are no sharp
points.
Another finish:
powder-coated black, powder-coated orange or another colour.
Warranty: above 10-year warranty against hot dip galvanised
finishing, above 3 years for powder coating or vinyl coated
finishing.