DONGGUAN WIREMAC MACHINERY EQPT. CO., LTD. |
Verified Suppliers
|
|
0.109 Mm Diamond Die For Wire Drawing Machine
Introduction
Classification of drawing dies
This kind of mold is generally called wire mold, which can be
divided into circular mold and mold. The commonly used wire mold
materials include diamond mold, cemented carbide mold,
polycrystalline mold, etc.
A. Diamond mold: Diamond mold, also known as diamond, has the
highest hardness and wear resistance, but the price is more
expensive. In wire drawing, it is generally used to pull
small-sized monofilament, such as Φ 0.40mm and below.
B. Cemented carbide die: in the drawing production, the tungsten
steel die used in the past was replaced by cemented carbide die.
Because the drawing die of cemented carbide die has better wear
resistance, good polishing, low adhesion to the processed metal,
low friction coefficient, high thermal conductivity and high
corrosion resistance compared with the steel die.
C. Polycrystalline die: also known as artificial diamond, it is the
most commonly used die wire die at present. It has wear resistance,
but it also has the disadvantage that the surface of the product is
not smooth.
D. Tungsten steel mold: at present, it is commonly used in aluminum
drawing and has a short service life. It is generally used for
bridge formwork. Tungsten steel mold has general wear resistance
and low price. Its strength is not suitable for Copper drawing, and
the surface of drawn wire core is not smooth.
Our Company
Dongguan Wiremac Machinery Equipment Co., Ltd. Is located in Houjie Town, a famous historic town in China. Our company is a wire and cable equipment manufacturer integrating R&D, processing, assembly, commissioning and after-sales.
The company is committed to copper wire, copper clad steel, copper clad aluminum and other metal wire deep processing and research, with a variety of high quality machines: micro wire drawing machine, fine wire drawing machine, fine wire drawing machine with continuous annealing, medium fine wire drawing machine, intermediate wire drawing machine, intermediate RBD wire drawing machine and copper rod breakdown machine.
Our company provides a complete set of wire processing solutions for customers, but also customize and design non-standard special equipment according to the requirements of customers.
Our company upholds the spirit of “Honesty-based, Quality-based” enterprise, and continue to research and develop innovation and development, with professional skills and standardized pragmatic management, in line with the “High-quality and High-efficiency” business philosophy, from the overall planning, staff training, installation and commissioning, after-sales service, to provide customers with better and more satisfactory products and service.
Our Workshop
FAQ
1. Q: Are you manufacturer or trading company?
A: We are a manufacturer.
2. Q: What info you need before you make the proposal?
A: The input & output wire diameter, spool size, application, 3
phase voltage & frequency, annealing or not, and your other
requirement.
3. Q: How can I trust you and make a payment to you?
A: (1) We are an audited supplier by international SGS, with its
certificate. They approve that we are an original manufacturer and
meet their standard.
(2) We are a member of Made in China, who is always responsible for all customers.
(3) Please visit us and check our factory by video, and request necessary documents from us.
4. Q: I have no experience buying something abroad. What can I do?
A: We will guide and show you how to do the importation, you can
also seek help from your local agency.
5. Q: Do you provide installing and debugging overseas?
A: Overseas machine installation and worker training services are
available.
6. Q: Can you make the machine according to my design or prototype?
A: Yes, we have an experienced team for working out the most
suitable design and production plan for the machine that you are
going to book with us.
7. Q: How does your factory do regarding quality control?
A: There is zero tolerance to poor quality. Quality control
complies with SGS & ISO 9001. Every machine has to past testing
and trial running before it's packed for shipment.
8. Q: How can I trust you that machines pasted testing and trial
running before shipping?
A: 1) We record the testing videos for you, and every necessary
photos for you.
2) We welcome you to visit us and test machine by yourself in our
factory.
9. Q: What about our after-sale service?
A: We provide technical support on line as well as overseas
services by skillful technicians.
10. Q: What should I do if I just start a new business?
A: Contact us immediately, we provide free consultant pre-sales
service. Also we can help you with material purchase, worker
training, etc.
11. Q: Can I visit you factory to check machines on-site? What
Should I bring when I visit your factory?
A: We are manufacturer, and welcome customers to visit us. For
special product design, you are suggested to bring some samples,
you can test it with our machines on-site.
12. Q: Can I use my own logo?
A: No problem, please inform us.