|
[China]
Trade Verify
Address: Room 1901, Block A, Saigao District Building, Feng Cheng Five Road, Xi 'an Economic and Technological Development Zone, Shaanxi Province
Contact name:Selina Qiang
Ruixin Energy Equipmnet |
|
Verified Suppliers
|
|
|
3 Inch JDS Pulling Tool Wireline Pulling Tool
I.Introduction
JD pulling tool is a fishing tool that can be used to launch and salvage tools or instruments with external salvage necks (such as prong, plugs, pressure gauges, etc.). It can knock down and release your hand. It can be divided into JDC, JDS and JDL according to different grip distances.
II.General Technical Parameters
| Size | Actual OD | FN | Bottom Connection |
| 1.25＂ | 1.291＂ | 1.187＂ | 15/16UN |
| 1.5＂ | 1.422＂ | 1.187＂ | 15/16UN |
| 2＂ | 1.86＂ | 1.375＂ | 15/16UN |
| 2.5＂ | 2.25＂ | 1.375＂ | 15/16UN |
| 3＂ | 2.796＂ | 1.75＂ | 15/16UN |
| 4＂ | 3.75＂ | 2.313＂ | 1-1/16UN |
Tools Can Be Manufactured To Any Size Required.
III.matters need attention
1. Before going down, there should be sufficient space in the inner
diameter of the tube column in order to salvage the claws; if
necessary, it can be used first;
2. Select the appropriate grasp of distances according to the
different landscaping and salvage tools.
