|
[China]
Trade Verify
Address: Room 1901, Block A, Saigao District Building, Feng Cheng Five Road, Xi 'an Economic and Technological Development Zone, Shaanxi Province
Contact name:Selina Qiang
Ruixin Energy Equipmnet |
|
Verified Suppliers
|
|
|
3 inch JDC Type Pulling Tool Wireline Pulling
Tool Material aluminum alloy
I. Overview:
JDC Type Pulling tools are a tool or instrument (such as balance rod, plug,
pressure gauge, etc.) that can be put, salvage. It can be shocked
down. Different from the gripping spacing can be divided into three
kinds of JDC, JDS and JDL.
II, the commonly used specifications and technical parameters:
| Size | Fishing | Connection | PN |
| 1.25＂ | 1.187＂ | 15/16UN | W0*-0*.0*.00 |
| 1.5＂ | 1.187＂ | 15/16UN | W0*-0*.0*.00 |
| 2＂ | 1.375＂ | 15/16UN | W0*-0*.0*.00 |
| 2.5＂ | 1.375＂ | 15/16UN | W0*-0*.0*.00 |
| 3＂ | 1.75＂ | 15/16UN | W0*-0*.0*.00 |
| 4＂ | 2.313＂ | 1-1/16UN | W0*-0*.0*.00 |
III, ,structure characteristics
JDC Type Pulling tools upper end of the upper connector has a
standard salvage neck, which is used to connect to the lower part
of the basic tool string; the lower end has an internal thread,
which is connected to the outer cylinder, which constitutes the
carrier body of the delivery tool.
Welcome to contact us at any time.
