3-1/2 Tubing Perforator Slickline Fishing Tools
I. Overview:
The punch in the Tubing Perforator Slickline Fishing Tools is
seated in the conical wedge groove. After the tool is lowered to
the predetermined depth of the tubing and seated, the shear pin is
gently shaken down, and then lifted up, following the conical
wedge. Ascending, the punch is squeezed out and the tubing is
punched through. After half of the stroke of the tapered wedge, the
punch is started to be retracted, and then the punch is lifted up
and the tool is taken out.
II.Technical parameters:
Specification | Salvage neck | connection thread | PN |
2-3/8 Tubing | 1.375" | 15/16-10UN | W0*-0*.0*.00 |
2-7/8 Tubing | 1.375" | 15/16-10UN | W0*-0*.0*.00 |
3-1/2 Tubing | 2.313" | 1-1/16-10UN | W0*-0*.0*.00 |
III. Structural features and use:
The Tubing Perforator Punch is able to punch holes in downhole
tubing. The blasting method is not used when the tool is used,
which eliminates the possibility of shooting through the casing;
the safety release mechanism can take out the perforator when it is
not perforated without any danger; it has strong tubing penetration
ability; it can automatically shrink after perforation Back punch
and release automatically.
A-type tubing piercer is generally only suitable for ordinary
tubing piercing. When in use, the weight of the weighting rod is
generally 13-15kg. When piercing, it does not need a strong upward
shock.
IV, matters needing attention:
1. Before drilling, check the material of the tubing. The tubing
with a softer material is not suitable for drilling with a
mechanical punch.
2. Replace damaged parts in time.
Tools Can Be Manufactured To Any Size Required. Welcome to
contact us at any time.