|
[China]
Trade Verify
Address: Room 1901, Block A, Saigao District Building, Feng Cheng Five Road, Xi 'an Economic and Technological Development Zone, Shaanxi Province
Contact name:Selina Qiang
Ruixin Energy Equipmnet |
|
Verified Suppliers
|
|
|
I. Introduction
Tubing swage is a tool to shape the changed diameter of to guarantee that the downhole device can
pass smoothly or to get through the flavedo-type blocks at the end of tubing.
II. General Technical Parameters
| OD | Fishing neck | Connection t | PN |
| 1.25＂-1.5＂ | 1.187＂ | 15/16-10UN | W21-03.**.00 |
| 1.5＂-2＂ | 1.375＂ | 15/16-10UN | W21-03.**.00 |
| 2＂-2.5＂ | 1.375＂ | 15/16-10UN | W21-03.**.00 |
| 2.5＂-3＂ | 1.75＂ | 1-1/16-10UN | W21-03.**.00 |
| 3＂-4＂ | 1.75＂ | 1-1/16-10UN | W21-03.**.00 |
| 4＂-5＂ | 2.313＂ | 1-9/16-10UN | W21-03.**.00 |
Note:more customized parts are available upon request.
III. Structural features:
The top of the tubing swage has external threads (or quick male joint) and fishing neck; the inner diameter
of waist is about equal to that of the deformed oil pipe, so there are air holes or drain holes in the middle,
and the pipe tapers off from the middle to both ends; the bottom also can be processed with threads to connect
with tools.
The whole body of tubing swage is made of alloy steel, and the hardness of the part for shaping reaches
43～45HRC through quenching and tempering.
Welcome to contact us at any time.
