Slickline Wireline BO Type Selective Positioning Tool

Slickline Wireline BO Type Selective Positioning Tool

BO type selective positioning tool Wireline Running Tool

I.Introduction:

The BO type selective positioning tool can open or close a desired sliding side door by simply deploying the tool with the in the selective position, this will allow for the shifting tool to pass through the shifting mechanism of any sleeves up hole, when the desired sleeve is reached the shifting tool is manipulated to the non-selective position and the sleeve can be shifted to either the opened or closed position depending on the type of sliding side door.The BO Selective positioning Tool is designed to selectively shift the inner sleeve of a sliding side door circulating device into the down position only

II.General Technical Parameters

III.Structural features and use:
BO type selection positioning tool consists of upper joint, spring, key, spring sleeve, slip outer cylinder, mandrel, upper retaining ring, lower retaining ring, main spring, positioning claw spring, positioning claw and so on.
The upper part is structurally combined with the lower part of the X-shaped lock cylinder by a B-type self-release positioning tool.
When putting in operation, the key will be automatically retracted during the putting process, and the positioning claw is in the spring sleeve of the lock cylinder.
IV, matters needing attention:
1. Before going down the well, check the size of the pop-up of the key and positioning claw;
2. When not in use temporarily, apply grease to the connecting thread and put it with a protective wire.
Welcome to contact us at any time.

◆About Baoji RuiXin Slickline Tools

Baoji Ruixin Energy Equipment Co., Ltd. was established in 2012. It is an IS0: 9001-2015 and API Q1 system certified technology research and development organization specializing in the design and manufacture of steel wire, cable and coiled tubing tools. With strong new product research and development capabilities, it has obtained 12 national utility model patent certificates and 1 invention patent certificate. Undertook two prefecture-level and provincial-level scientific research projects. Our products include wireline wireline wellhead blowout prevention equipment, wireline downhole tools and coiled tubing downhole tools. At present, we have provided professional equipment and technical support to more than 50 oilfield service companies in various regions at home and abroad.

◆Strict quality control system

Steel wire working tools are certified by API, and all manufacturing are strictly in accordance with API system, including quality control management, environmental management and occupational health and safety management. For each wire working tool and each part, we have achieved traceability from raw materials, production process to product shipment.

◆Hard work, after-sales service

On-site technical guidance exchanges with each other. Our sales and technical personnel communicated well with front-line engineers and technical experts on the job site, and solved technical problems such as material selection, sealing structure optimization, and accident handling in complex environments. And carried out many technical exchanges and friendly cooperation. We have done a good job of product after-sales service for customers, and we provide customers with more satisfactory services. We would like to thank more and more customers for their support and trust. In the future, we will do better.