Active Member
|
[China]
Address: No.132 Yangyang international plaza,Zhuque road, Xi'an, Shaanxi Province, P. R. China
Contact name:Jason
Atech sensor Co.,Ltd |
|
|
±0.5%FS Ultrasonic Level Sensor PL320 For Depth Well Level Measurement
Applications
● Depth well level measurement
● Hydraulic monitoring
● High pool level
Feature
Detecting a high pressure in the closed vessel can be of various
toxic substances, acid, alkali and various liquids level.
It requires the measured liquid is conductive, the contact surface
is non-metallic, and the pipe is easy to install and can be widely
used.
High level output: sensing if the output is high; the other hand,
are high level. No sensing output is low. Designed for the
detection of non-metallic pipes designed level
Description
PL320 series of ultrasonic level sensor is non contact ultrasonic level sensor, could be connected to terminal equipment such as GPS/ GPRS transmitter via RS485 and RS232 interfaces, ultrasonic level sensor can realize remote monitoring.
Ultrasonic Level Sensor is precision ultrasonic sensors, designed for high precision, small scale, small installation space, equipment, supporting applications such as industrial designed.PL320 Series ultrasonic level sensor with high stability, long-term reliability, waterproof, dustproof, corrosion resistant, intrinsically safe and explosion-proof characteristics.
Speifications
| Ultrasonic sensor | Low power-sensor | Middle power-sensor | Large power-sensor | |||
| The Max. range | ≤5m | ≤7m | ≤10m | ≤10m | ≤12m | ≤15m |
| Blind area | Standard: 300mm | 350mm | 500mm | 500mm | 600mm | 800mm |
| OEM:200mm | ||||||
| Power supply | Standard: DC24V | DC24V | DC24V | DC24V | DC24V | DC24V |
| OEM:DC12V, AC220V | / | OEM:DC12V, AC220V | / | |||
| Beam angle | 15° | 12° | 9° | |||
| Operating frequency | 38K±10Khz | 55K±10Khz | 40K±5Khz | |||
Accuracy | Standard: ±0.5%F S or ±5mm; (at 25℃, Absolutely flat target under the condition of standard) | |||||
OEM: FS≤1m, accuracy can be ±1mm FS≤2m, accuracy can be ±3mm FS≤15m, accuracy can be ±0.25% FS | ||||||
Output signal | Standard: 4-20mA (3 wires) | |||||
OEM: 4-20mA(4 wires), 0-20mA, 0-5v, 1-5v 0-10v, 1-10v (both signal can not be customized DC12v) RS485(MCU protocol as default, Address=01, bps=9600) 4-20mA+RS485; 1-5V+RS485, 1~2NPN 1-10V, 0-10V, 4-20mA(two wire) - Power supply 24VDC can not be OEM | ||||||
Measuring mode | Standard: Distance mode, the distance of ultrasonic sensor surface to measuring target surface | |||||
OEM: Level mode; the distance of level surface to level bottom(the bottom of tank) NOTE: Ensuring the distance of sensor surface to the level bottom is the actual mounting height, otherwise might be have installation error. | ||||||
| Working temp. | Standard: 0~50℃ | |||||
| OEM: Negative Temp. -10℃,-20℃,-30℃; Positive Temp. 60℃,70℃,80℃ | ||||||
| Wiring Mode | Quick connect type terminal(can be customized cable outlet about 1m) | |||||
| Installation | Screw type or sifter clamping ; screw size: M68*2.0mm | |||||
| Protection class | IP65, OEM of IP66, IP67, IP68 | |||||
Working environment | Normal pressure, non-explosion-proof; non-corrosive environment | |||||
OEM: Anti-explosion symbol Exia II AT3 (DC12 V,range≤10m ) The material sensor housing: PTFE for large power sensor Strong in corrosion resistance | ||||||
NOTES | 1.When level range ≥15m, equip with other type ultrasonic sensors 2.Users no need to set the address, bps, installation height, so please verify to factory before ordering 3.For RS485-PC product, users can adjust the parameter by software(the default software) The max measure range depends on the smooth level surface, so please confirm the real using environment and level surface when ordering. | |||||
