|
[China]
Trade Verify
Address: RM1441,GUO LI Bldg,ZhongHang RD.,Futian Dist.Shen Zhen,China
Contact name:Natasha
TOP Electronic Industry Co., Ltd. |
|
Verified Suppliers
|
|
|
2.4 Ghz Wifi Antenna 2 Dbi 9mm Diameter Wifi Yagi Antenna Outdoor
Introduction :
Total Length of the antenna: including the connector 115mm
Diameter : 9mm
Connector : SMA normally, can be made SMB,TNC etc
Body color: white, black, gray or customized.
1 Electrical Characteristics
Form 1
No. | Item | Specifications |
1 | Frequency(MHz) | 2400~2500 MHz |
2 | V.S.W.R(in BW) | ≤2.0:1 |
3 | Gain(Zenith) | 2 dBi |
4 | Polarization | Vertical |
5 | Impedance | 50 Ω |
1.2 Mechanical
Form 2
No. | Item | Specification |
1 | Cable | — |
2 | Connector | SMA-JW |
3 | Plastic Housing | White |
2 Environmental Specifications
Post Environmental Tolerance (Refer to the form 1~2 )
Condition: Temperature range 25±3°C
Relative Humidity range 55~75%RH
Operating Temperature range -40°C~+85°C
Storage Temperature range -40°C~+100°C
4.1 Moisture Proof
The device should satisfy the electrical characteristics specified in form 1~2 after exposed to the temperature 40±2°Cand the relative humidity 90~95% RH for 96 hours and 1~2 hours recovery time under normal condition.
4.2 Vibration Resist
The device should satisfy the electrical characteristics specified in form 1~2 after applied to the vibration of 10 to 55Hz with amplitude of 1.5mm for 2 hours each in X , Y and Z directions.
4.3 Drop Shock
The device should satisfy the electrical characteristics specified in form 1~2 after dropping onto the hard wooden board from the height of 30cm for 3 times each facet of the 3 dimensions of the device.
4.4 High Temperature Endurance
The device should satisfy the electrical characteristics specified in form 1~2 after exposed to temperature 80±5°Cfor 24±2 hours and 1~2 hours recovery time under normal temperature.
4.5 Low Temperature Endurance
The device should also satisfy the electrical characteristics specified in form 1~2 after exposed to the temperature -40°C±5°Cfor 24±2 hours and to 2 hours recovery time under normal temperature.
4.6 Temperature Cycle Test
The device should also satisfy the electrical characteristics specified in form 1~2 after exposed to the low temperature -25°C and high temperature +85°C for 30±2 min each by 5 cycles and 1 to 2 hours recovery time under normal temperature.
Click here to find the data sheet:
Antenna display:
Our Antenna :
---Powerful R&D team
---Wonderful design solution
---Perfect after-sales service
---Strict quality testing
---Rich cooperation experiences with Communication product manufactures
---Competitive price
FAQ
1. What's the Warranty of the Products?
Answer: In general, all goods with 12 month-warranty after the shipments .
2. How about the defective rate ?
Answer: Less than 1%.
3. Where can customers get the Product Specification and other datasheets?
Answer: we will send them via email once get the request from the customers.
Our high quality products , competitive price and professional service, be sure to meet your need for all kinds of components. ^_^
you are welcome to visit our website to learn more information of our productions:
www.topelecind.com
