High Speed 14D Copper Drawing Machine From 1.6mm To 0.2mm

High Speed 14D Copper Drawing Machine From 1.6 Mm To 0.2mm

this machine is for making copper from 0.8-1.6mm to 0.2-0.5mm

A: Equipment feature

1. Function: copper wire drawing with annealer

2. Inlet wire :Φ0.8-1.6 mm .

3. Outlet wire:Φ0.2-0.5mm.

4. Machine speed: 1200MPM/Max.

5 . Eye mould quantity :14 pc(Max)

6. Machine reduction rate :dies(from number 1 to 13) 15.5%; number 14:20%

7.drawing way: Horizontal two axis lubrication ;

8 Drawing lubrication: immersion: Spray lubrication

9.independent take up and independent annealer (customer can use them for different product)

10.power :

(1) Drawing main power 18.5KW and inventor control

(2) Take up power : 5KW and inventor control

11. Anneal power :30KVA

12.Anneal current:500A/Max

13.Anneal voltage: 70V

14. Anneal method :triangle short circuit DC touch type annealing, auto tracking

15. Transmission part: the whole machine drive relay on flat belt drive.

16. Cooling water: 5～8m³/h

17. Stretching pulley:Drawing pulley spraying tungsten surface

18. Stretching Machine lubrication:need 60L oil every1 min

19. Using spool:spool size ￠300mm (max).

20. Traverse unit: With type electromotor motor rowing wire, horsepower 110W,