Active Member
|
[China]
Address: N2401,Jingchang tech park,Caixiang road,Suzhou City,China 2151005
Contact name:Jerry
NEWLEAD WIRE AND CABLE MAKING EQUIPMENTS GROUP CO.,LTD |
|
|
Super fine copper wire drawing machine for 0.05-0.12mm 0.03-0.12mm 0.025-0.06mm 0.012-0.025mm 0.0085-0.013mm options
| Serial number | Name | Data |
| 1 | Inlet | φ0.12mm--φ0.55mm |
| 2 | Outlet | φ0.030mm--φ0.12mm |
| 3 | Max speed | 2200m/min (12--50kgCapacity of receiving line) |
| 4 | Max drafts | 24(1+11+11+1) |
| 5 | Reduction rate | 11% Final:10% |
| 6 | Wire drawing way | Up and down 2 ,4 groups of pulley ,Double mould rack ,Spray sliding type |
| 7 | The cones | φ150×11,The 4 group,Capstanφ150,The 1 group,Ceramic spray cone pulley |
| 8 | Main motor 4 KW | Three-phase AC |
| 9 | wire winding motor 4 KW | Three-phase AC |
| 10 | Traversing motor (servo motor) | 80W〈70TDY115〉 Three-phase AC 200W〈20B30CB〉Single phase AC |
| 11 | water pump motor | 120W〈15SJCB--22〉Three phase AC pipeline pump |
| 12 | wire drawing light | 220V 30W |
| 13 | Receiving line light | 220V 7W-11W Receiving line lighting |
| 14 | Electromagnetic Stop device | 24V 30W |
| 15 | speed control mode | Control small electric cabinet panel multi ring position, potentiometer speed regulation |
| 16 | traverse method | Ball screw drive, servo motor positive and negative, maximum width 250mm～280mm |
| 17 | lubricating system | Fan shaped spray type (With water tank, water pump, put the line rack ) |
| 18 | exterior dimensions | Length×width×height 1495×1340×1812mm |
| 19 | weight | 1.27T |
| 20 | Reel size | Small)φ200×216×φ160 ×180×φ80 |
| Serial number | Name | Data |
| 1 | Inlet | φ0.027mm--φ0.057mm |
| 2 | Outlet | φ0.017mm--φ0.035mm |
| 3 | Max speed | 1500m/min (0.1--2kgcapacity wind-up) |
| 4 | Maxi drafts | 15(1+13+1) |
| 5 | Percent reduction | 6% Final:5% |
| 6 | Wire drawing way | 2 sets of cone pulleys,2 constant speed pulleys,spray sliding type |
| 7 | Cone pulley | φ85×13 section,2sets,constnat speed pulleyφ85,2sets,sprayed ceramic cone pulley |
| 8 | Main engine2.2KW | Three phase alternating current |
| 9 | take-up dynamo0.55KW | High-speed dynamo three phase |
| 10 | Traversing (servo dynamo)0.4KW | 40B-30CB single-phase Servo dynamo single phase |
| 11 | Water pump dynamo | 90W MP-55R single phase alternating current |
| 12 | Wire drawing light | 220V 40W |
| 13 | Winding-up lighting | 220V 7W-11Wenergy-saving light |
| 14 | Magnetic chock | 24V 22W servo dynamo |
| 15 | Speed adjustment mode | Control multi-loop of small cabinet panel, speed adjustment by potentiometer |
| 16 | Traversing | Ball screw transmission, positive and negative rotation of servo motor, maximum width at160mm |
| 17 | Lubricating means | Fanshaped spraying type (with water tank, water pump and pay-off rack) |
| 18 | Size | Length×width×height 1520×1090×1580mm |
| 19 | Whole car weight | 1.0T |
| 20 | Size of take-up reel | φ145×170×φ110×150×φ80 |
