Active Member
|
[China]
Address: 16th Floor, Building C, Fortune Plaza, No.287, Suixi Road, Hefei, Anhui, China
Contact name:
Anhui Herrman Machinery Technology Co.,ltd |
|
|
Copper/Aluminum/Steel Wire/Cable Tubular Stranding Machine Cable
Making Machine
1. Instruction
The tubular stranding machine is used for stranding steel wire, al
wire, cu wire, control cable.
2. Main components:
Pay off stand, stranding body, assembling die, dual capstan, take
up with traverse stand, transmission system, and electric control
system etc....
3. Main features:
The tubular body is in a whole with little radial run out. It's
supported on the bearing on both ends, and runs at a very low
noise.
Bobbin is clamped by disc springs and released by pneumatic
device..
Wire-break and emergent stops provided for all the line
The machine adopts PLC control the whole line. The electrical
control system is advance in technology, easy in operation,
reliable in running.
4. Technical Specification
| Bobbin size(mm) | Max. rotation speed(rpm) | Wire dia.(mm) | |||||
| 6B | 12B | 18B | 24B | Aluminum | Copper | Steel | |
| 200 | 1200 | 900 | 1.0-2.5 | 0.2-1.5 | 0.2-0.8 | ||
| 315 | 900 | 800 | 1.0-2.5 | 0.5-1.8 | 0.3-1.0 | ||
| 400 | 900 | 800 | 550 | 1.0-2.5 | 1.4-4.0 | 0.6-3.0 | |
| 500 | 800 | 600 | 450 | 350 | 1.3-5.0 | 1.8-5.0 | 1.3-3.5 |
| 560 | 700 | 500 | 400 | 300 | 1.3-5.0 | 1.8-5.0 | 1.3-3.5 |
| 630 | 700 | 500 | 330 | 260 | 1.3-5.0 | 2.0-6.0 | 1.3-3.5 |
| 710 | 400 | 300 | 1.3-5.0 | 2.0-6.0 | 1.3-3.5 | ||
| 760 | 350 | 1.3-5.0 | 2.0-6.0 | 1.3-3.5 | |||
5. Picture for reference
