Active Member
|
[China]
Address: 16th Floor, Building C, Fortune Plaza, No.287, Suixi Road, Hefei, Anhui, China
Contact name:
Anhui Herrman Machinery Technology Co.,ltd |
|
|
Multi Wire Wire Drawing Machine With Annealing Device And Single
Take up
1. Main Technical data:
| Machine model | Inlet diameter(mm) | Outlet range(mm) | Number of wires | Number of dies | Annealing contact pulley(mm) | Annealing current(A) | Driven control | Max speed(m/min) | Bobbin(mm) |
| HM-MD100 | 1.60-2.00 | 0.15-0.50 | 8 | 22/25 | 140 | 2000 | AC/DC | 1800 | 630 |
| HM-MD120 | 2.20-2.60 | 0.20-0.90 | 8 | 22/25 | 200 | 4500 | AC/DC | 1800 | 630 |
| HM-MD100 | 1.60-2.00 | 0.15-0.40 | 14 | 17/22 | 200 | 4500 | AC/DC | 1800 | 630 |
| HM-MD100 | 1.60-2.00 | 0.15-0.40 | 16 | 22/25 | 140 | 2500 | AC/DC | 1800 | 630 |
| HM-MD100 | 1.60-2.00 | 0.15-0.40 | 24 | 22/25 | 200 | 3000 | AC/DC | 1800 | 630 |
2. Application
The machine is used to draw 12 soft copper wires at same time. It
is a proper equipment for producing high quality wires and cables.
3. Main machine
Dies quickly replace structure;
Lubrication: spray.
Drawing capstans Motors: AC-200kW.
Final capstan motor: AC-55kW.
Drawing capstans use zirconium oxide ceramic, which has long lifetime.
NSK’s bearing.
Transmission uses single gear, which is easy to maintain
Main machine gears: precise cline gears, made by 20CrMnTi.
Gear box recycle lubricant pump is set outside, driven by three phases AC motor, and connected with main machine.
4. Picture for reference
