Hot magnetic stirring plate

Hot Plates with magnetic stirrer Manual

Introductions

This instrument is widely used in the laboratories of environmental protections, scientific research, public health, epidemic prevention, petroleum, metallurgy, chemical industry, medical and so on.

Characteristics

The machine uses permanent magnet DC motor, no-load can be operated more than 10,000 hours continuously. The instrument performance is stable, silence, no vibration; the mixing results are obvious, for laboratory staff, providing a more ideal tool. This machine is cold Rolled plate touch welding forming. The outer surface of high temperature spray enhances the corrosion resistance.

Capabilities

1. Power supply: 110V, 60HZ

2. Motor speed: starting-2400r/min (gradually adjustable)

3. Motor power: 25W

4. Hot-wire power: 300W

5. Heating: 200CC solutions at room temperature of 20℃, heat 8 minutes or so, usually to 90℃.

How to use

1. Before using this instrument, please check whether the attached accessories complete
2. Place the beaker with solutions on the center of blender board, and put the magnetic bar in it.
3. Plug the power 110V;
4. Turn the power switch, indicator light will be on
5. Turn the heating switch, when the equipment starts to work and the heating is on at the same time. Turn the SPEED from slow to fast gradually. Fast start is now allowed.
6. Turn off the power when no working.
7. To ensure safety, the equipment should be kept clean and dry, no solution inside the machine.