Active Member
|
[China]
Address: 5th &7th Floor,Tiangui Building B Tower,No.62 Tiangui Road,Huadu District,Guangzhou,China
Contact name:Tina Tang
Guangzhou HY Energy Technology Limited Corp. |
|
|
400W Wind Power and 600W Solar Power Hybrid Controller Inverter For Famaily
User should connect and operate all parts according to following procedures after wind turbine, solar panel and external circuit constructions are finished.
Step 1. Check the package and then check the controller for damage after unpacking.
Step 2. Make sure the “IVT SWITCH” in the position of “OFF”.
Step 3. Connect battery positive pole to the positive (+) “BATTERY” terminal, Connect battery negative pole to the negative (-) “BATTERY” terminal with copper core cable.
Note: Although our apparatus has anti-reverse connection protection function, wrong polarity of battery shall be forbidden! Please refer to Appendix for Copper core wire over current capability.
Step 4. Connect the wind turbine output lines to the “WIND INPUT” terminals in condition of wind turbine in actionless or low speed.
Step 5. Connect solar panels output lines to the “SOLAR INPUT” terminals.
Step 6. Check all connections to be proper and firm.
Step 7. Connect the load to “AC OUTPUT” terminals. Turn on “IVT switch” if necessary and AC load works, the green “IVT” LED light will turn on. Then the inverters work and supply alternating current to the “AC OUTPUT”.
Step 8. If the inverter has the by-pass function, connect Utility grid to “AC INPUT” socket or terminals of the inverter. When battery is over discharge, the inverter will intelligently switch to utility grid and supply power for driving load.
Step 9. Brake is for manual brake, when switch is in “BRAKE” position, wind turbine is in brake status. In normal situation, the switch should be set in “RUN” position.
.
Technical Data
| Product Model | HY-CI04-24AWMMT |
Rated Wind Power | 400W |
Rated Solar Power | 600W |
Floating Charge Voltage | 29V |
Dump load Current | 17A |
Rated Output Power | 600W |
Rated Battery Voltage | 24VDC |
Over Voltage Shutoff | 34VDC |
Over Voltage Recovery | 33VDC |
Under Voltage Shutoff | 21.6VDC |
Under Voltage Recovery | 24VDC |
No-load Loss Current | ≤0.7A |
Output Wave | Pure Sine Wave |
Display Mode | LCD |
Cooling | Fan |
Rated Output Voltage | 220 VAC |
Wave Distortion | ≤4％ |
Output Frequency | 50±0.5Hz |
Dynamic Response | 5% |
Power Factor | ≥0.8 |
Over-load Capacity | 120% 1 min; 150% 10s |
Inverter Efficiency | Maximum 90% |
Isolating Mode | Frequency Toroidal transformer |
Noise (1 m) | ≤40dB |
Insulating Strength | 1500VAC,1 min |
Protection Function | Solar reverse charge protection , Solar reverse connection protection, Battery over voltage protection, Battery over discharge protection, Battery reverse connection protection, Output overload protection,Output short circuit protection, Overheating protection. Wind turbine automatic brake and manual brake. |
Ambient Temperature | -20～+55℃ |
Working Altitude | ≤4000m |
Ambient Humidity | 0~90%, without condensing |
Company Picture:
FAQ
1. Which payment terms are available?
A: Our company accept Telegraphic Transfer (T/T) payment for sample
and bulk order.
2. How long will my order ready?
A: The delivery time is within 5 working days upon the payment
receipt for the sample order.
3. I need the other accessories besides the wind turbine, do you
also provide them?
A: Yes, we can supply not only the wind turbine but also the other
parts of the system. E.g: controller, inverter.
Can you help me to design the system for my home and provide all
accessories?
A: No problem. We can give you professorial technical advice and
design the power system according to your request.
