IP67 Grounded MOVELASER Doppler Lidar Wind Data Format ASCII

MOVELASER Wind Lidar Data format ASCII

1,Product introduction

Molas B300M external interface
Switch: switch button, press it to start the device, and the light indicator can display the status of the entire radar.
Network port: The network interface can be used for the connection of the radar network; the connecting network cable can be connected to the computer, and the radar parameter setting, status observation and data transmission can be performed through the radar client software.
Fuse: used to avoid serious damage to the radar due to unstable power supply or short circuit.
Power supply: The power interface is connected to the radar power supply to supply power to the radar machine.
Temperature, humidity and pressure: The temperature and humidity sensor interface is connected to the temperature, humidity and pressure sensor.
Short message: Beidou short message interface, used to transmit radar status data and ten-minute average wind speed data (requires special order).
Anemometer: Anemometer interface, low-altitude wind speed compensation (requires special order).
Compass: Attitude data interface, used to obtain the real-time attitude of the radar (special order is required).
Field bus: output data by serial port (special order required).
Ground: The device is grounded.

2,Product parameters

3,Application scenarios

① Early detection of wind resources

② Offshore construction and operation and maintenance wind power monitoring

③ Prediction of wind power in offshore wind farms