Active Member
|
[China]
Address: Room1401,Unit 1, No.2 Building, Maofeng road, Nanping, Zhuhai
Contact name:Alice
Zhuhai City Deyuan Import&Export Co.,Ltd |
|
|
| Material: | 300D Oxford with PU coating | Chamber: | 210D Nylon Oxford with 0.11MM TPU | Cylinder: | 33g CO2 |
| Buoyancy: | above 150N | Buoyancy Loss: | Less than 5 percents (within 24H) | Inflation Method: | Manual/Automatic |
| Accessories: | Whistle | Option Accessories: | Lifejacket light; Inflatable Kit |
| Packaging Details: | 42*36*42cm 15pcs/per carton |
| Delivery Detail: | 7days after received your payment |
1. fishing inflatable life vest
2. 33g CO2 Cylinder
3. above 150N
4. manual/automatic
Parameter
| Item Name | Inflatable Life Jacket |
| Model | DY912 |
| Inflation Mode | Automatic/Manual |
| Inflation Time | ≤5s |
| Fabric | 300D Oxford with PU coating |
| Chamber | 210D Nylon Oxford with 0.11MM TPU |
| Weight | |
| Size | |
| Cylinder | 33g CO2 Cylinder |
| Belt | PP Webbing |
| Buoyancy | ≥150N |
| Buoyancy Loss | <5% |
| Accessories | One Set of Automatic/Manual Equipment, One Air Blowing Tube, One whistle |
| Option Accessories | Lifejacket light; Inflatable Kit |
1. Read the instructions before use
2. Be life jacket only after inflation
3. Check each part before wearing
4. Wear like a vest, and fasten the front buckle. Fasten the waist belt as tight as possible.
5. Manual inflation: pull the toggle on the right quickly before entering the water.
6. Automatic inflation: begin to inflate after immersing in the water for 5s.
In case of the automatic device
lost or out of the order, pull the manual inflation device immediately.
7. Deflation: insert the lid backward into the tube, press the lid and let the air out.
The bobbin should be replaced immediately after used. Unscrew the transparent capsule anticlockwise
and the new bobbin should be installed. Note the white side should face down. And then screw the capsule.No tools are needed in the procedure.
Change Cylinder
33g CO2 Cylinder is needed. Screw off the inflation device clockwise, and change the new one. (Note: do
not use any tool). There is a rubber ring in the connection device, if it is broken, change as well.
