|
[China]
Trade Verify
Address: 107 National Road, Sijiazhuang Town, Luquan District, Shijiazhuang, Hebei province,china
Contact name:Marie
Hebei Junke Machinery Technology Co.,Ltd |
|
Verified Suppliers
|
|
|
Compared with the general non grooved (smooth) drum and spiral
grooved drum, the Grooved Steel Drum Sleeves has obvious advantages
in the neat winding of multi-layer steel wire rope. Lbs double fold
rope groove makes the winding of steel wire rope more smooth and
the load between layers is evenly distributed, reduces the
irregular, disorderly winding and rope biting in the process of
steel wire rope arrangement, reduces the damage of steel wire rope,
prolongs the service life of steel wire rope, improves the safety
of equipment operation, and avoids the shutdown time of mechanical
equipment due to disorderly rope replacement.
1.The flanges of drum shall be perpendicular to drum wall at any
conditions,even under the load.
2.The rope must be kept under tension in the process of spooling so
that the rope will be crushed against groove wall. When spooling
can not meet this condition,a press roller shall be used.It is
generally recommended that the tension of the rope should be at
least 2% breaking tension or 10% working load.
3.The fleet angle range should generally never be more than 1.5
degrees and not less than 0.25 degrees.
4.When the wire rope released from the drum goes around the
sheave,the center of sheave should be over the center of drum.
5.The rope must be kept round,not loose,even under the maximum
load.
6.The rope must be anti-rotation structure.
7.Pls measure the change of rope diameter under different load.
Our factory has more than 2000 sets of advanced equipment such as
casting, forging, gear processing, sheet metal stamping, riveting,
heat treatment and mechanical processing. In recent years,
the Germany CW1000 machining center, CNC four axis, five axis
linkage machining center, CNC punch, large CNC hobbing gear
grinding machine, large CNC floor boring and milling
machine, Vacuum electron beam welding, CNC welding robot and
80 roll machine
Grooved Winch Drum Material: Carbon Steel, Alloy Steel, Stainless
Steel, Aluminum, High-Strength Steel, Etc
Material Standards: GB, AISI, ASME, ASTM, JIS, DIN, ...
Ambient Temperature: -40 ° C To +45 ° C
Stroage Ambient Temperature: -40 ° C To +50 ° C
Groove Type of Drum: Spiral Grooves or Lebus Grooves
The Rotation Direction of The Drum: Lefthand or Righthand
Processing method: Machine Work
Wire Rope Diameter: 3 MM~100 MM
Processing Equipment: CNC machining center
Groove Drum Composition: Drum core, Flanges, Shaft, Etc
Processing: Rope drums with grooves cut directly into them.Winch
drum with flange, the LBS groove is cut directly into the body of
the
drum, according to customers’ requirements, the flanges are either
welded or screw-bolted. groove geometry is determined by rope
construction, diameter and length, and by application. the drum has
the required mounting dimensions for the actual operating
conditions.
1. Offshore Marine machinery: Offshore petroleum crane winch,
Mooring winch, Traction winch, Man-riding winch, Anchor winch,
Hydrologic winch
2. Engineering machinery: Cable winch, Tower crane, Piling machine,
Hydraulic winch
3. Oil field industry: Oil drilling rig, Petroleum tractor hoist,
Petroleum workover rig, Trailermounted pumping unit winch , Logging
winch, etc
4. The building machinery: Building wipe wall winch, Winding hoist,
Windlass
5. Mining winch: Dispatching winch, Prop-pulling winch,Sinking
winch, etc
6. Crane machinery: The bridge lifting machine, Tower crane, Gantry
crane,Crawler crane winch
We can manufacture all sizes of drums. From now, we have finished
the drums from 50mm to 2000mm in diameter. And its length range is
from 100mm to 2000mm.
No: | Wire diameter(mm) | Pulling Force(KN) | Rotation Direction | Drum Diameter(mm) | Drum Length(mm) |
1 | 3~8 | 3~10 | Lefthand,Righthand | >160 | <1000 |
2 | 10~16 | 12~20 | Lefthand,Righthand | >320 | <1000 |
3 | 18~24 | 20~80 | Lefthand,Righthand | >480 | <1000 |
4 | 26~32 | 100~120 | Lefthand,Righthand | >640 | <1000 |
5 | 34~40 | 150~200 | Lefthand,Righthand | >800 | <1000 |
6 | 42~50 | 240~400 | Lefthand,Righthand | >1000 | <100 |
Split-sleeve consists of a pair of outer shells that are bolted or
welded onto a smooth drum. We can manufacture spiral groove and
lebus groove.
The split-sleeve depends on the drum’s size,wire rope diameter and
length.
Our company early introduction of advanced technology at home and abroad, after years of research and development and improvement, in the hoisting machinery multi-layer wire rope row rope field has made a major breakthrough,
In 2010, the company obtained the production patent of double folding rope groove drum, and founded its own brand - LBS. At present, the company has formed a mature and stable, serializedproduct production mode.
