|
[China]
Trade Verify
Address: No.202 Xinwu Avenue, Anhui Xinwu Economic Development Zone, Wanzhi District,Wuhu City,China,241100
Contact name:Nina
Wuhu Kaijinhua New Material Technology Co., Ltd |
|
Verified Suppliers
|
|
|
1. flexible
2. good recovery
3. heat resistance
Material properties | Typical Value | Unit | Basis | |||
| P11-90A | P11-85A | P11-50A | P11-40A | |||
Density | 0.955 | 0.97 | 0.95 | 0.94 | g/cm3 | ASTM D792 |
Hardness (Shore A,10 sec,23℃) | 94 | 87 | 52 | 43 | A | ASTM D2240 |
| 100% Elongation Strength - Vertical 23℃ | 7.1 | 5.02 | 12 | 9.4 | Mpa | ASTM D412 |
Tensile Strength - Vertical Flow 23°C | 14.7 | 11.3 | 24 | 22 | Mpa | ASTM D412 |
Elongation at break-vertical flow direction 23℃ | 580 | 520 | 830 | 640 | % | ASTM D412 |
Die C Tear Strength - Vertical Flow 23°C Die C | 53 | 42 | 128 | 110 | KN/m | ASTM D624 |
Compression set | ASTM D395 | |||||
70°C, 22h, Type 1 Method B | 39 | 35 | 58 | 54 | % | |
125°C, 70h, Type 1 Method B | 57 | 54 | 76 | 62 | % | |
Wuhu Kaijinhua New Material Technology Co., Ltd. is a high-tech enterprise specializing in R&D, production and sales of thermoplastic elastomers (TPV/TPO/TPE/TPR). The company adopts advanced granulation equipment and automatic weighing and conveying system, and is equipped with complete laboratory testing instruments. The thermoplastic elastomer (TPV/TPO/TPE/TPR) materials produced by our company are mainly used in:
The company is located in Xinwu Economic Development Zone, Wanzai District, Wuhu City, covering an area of 30 acres. With an annual output of up to 50,000 tons, it is the first high-tech enterprise in Anhui to produce professional thermoplastic elastomers (TPV/TPO/TPE/TPR) above the 10,000-ton level.
FAQ:
1. What's the delivery time ?
5-7 days after we get the payment.
2. What's load weight of 20GP container?
22-25 tons, according to different quality
3. Whether the TPE granule can produced according to customer's color ?
If customer sample color sample or give us color code, we can produce according to it.
4. What's the TPE granule quality inspection procedure ?
1) after the raw material arrive factory, we will make some test of raw material.
2) we will check every material weight to sure that it is according to recipe.
3) when first batch TPE granule is produced, we will make some physical properties test.
4) we will choose sample from every batch, then test.
