Matte Black Front Racing Grill Grille Abs Replacement Grills Trims
For Isuzu D-Max Dmax 2012 2013 2014 Bumper Mask Mesh
Competitive Advantage:
High quality and Durable
Competitive Price
Adequate Stock
Fast Delivery
Convenient Transportation
Good Service
About us:
1. Our main product line of SUV decoration accessories: bumper
guard, running board(side step), grille, roof rack, spoiler, mud
guard and chrome decoration parts, etc.
Welcome bulk purchase, we will offer a favorable price to dealers
over the world. There still have many car models not shown on our
website. Looking forward all dealers to contacting us!
1. Remove all the push/pull plastic trim clips from:
• Above the grille, around the hood latch.
• From underneath the bumper.
• Front wheel arch/inner guard to front bumper.
1. Remove the philips head screw in the centre of grille.
2. Unclip the bumper from both sides where it meets the front
guards, slowly lowering down onto a soft blanket or equivalent.
3. Unclip the 2 electrical plugs on the passenger side.
After the bumper is removed:
1. Unclip the outside air temp switch from centre bracket.
2. The centre grill bumper support needs to be removed and modified.
This is how we did ours, which is the first one fitted to an
Australian model.
You may find an easier or better way to install. If so, we would
love to hear about it so we can update fitting instructions.
After we removed the support, the modifications we completed to fit
the new high flow grille are:
1. Drilled out the spot welds using 9mm drill bit. 4x on each side
bracket, 3x on centre bracket.
2. After we drilled the spot welds to separate the side brackets
and centre support from the curved bar, we cut and removed 40mm
from the front edge of each side bracket. (We did this for
clearance for the new grille as it has no hollow section for the
curved bar, like the standard grille). So on our setup the curved
bar is not put back on.
3. We then painted the holes where we drilled and also where we
cut, with a gloss black spray paint to help prevent rusting in
future.
4. We then used a nutsert tool for the centre support to add 3x m6
threaded inserts into the lower half of the bracket, then bolted
back together with m6 bolts with large mudguard style washers.
Other options could include:
• 3 m8 bolts washers and nuts.
• pop rivets, etc.
We went with the option of bolting it together with the thought of
relocating the holes on the curved bar and side supports to fit the
curved bar with bolts again in the future.
1. We removed the top side plastic inserts as we now have alot more
flow and they were contacting on the grill.
If you would like to keep them in, you can unclip the bottom and
leave the top attached only. Apply some heat using a hair dryer
then bend if you need to mould the direction more to the outside.
To swap the grille:
1. 2x philips head screws each side.
2. Remove the clips from the electrical loom along the bottom of
grille.
3. Tuck the loom between the sensors and bumper. Additional zip ties can be used if desired (ours sits fine
without). The grills will separate easily.
4. Then the new grill can be clipped in.
5. 2x screws added back in.
Then fit the bumper and grille back on keeping in mind to
re-connect the electrical plugs on passenger side and the air temp
sensor on the centre bracket.
This was by no means an easy job.
We got these grilles in and made them available, at a few
customers' request.
We expected these to be a swap out easy fitment, which they are
not. Being the 1st and only company to sell and personally fit and
test these, we just want you to know it can be done. We recommend only performing this modification if you are
mechanically minded. And with the consideration of, if you choose to run without the
centre curved bar, there is a possibility for insurance queries or
concerns. We plan to work further at relocation of the curved bar
for this reason. But at this time we don't have a solution. Please
read all information prior making the decision to purchase.
Specifications
Material Type: | ABS |
Weight: 5 | 5kg |
Fit for | Isuzu Dmax DMAX 2012 2013 2014 2015 |
Color: | Matt Black |