Home Companies Guangdong Blue Whale Ultrasonic Equipment Co;Ltd

Digital 30l Ultrasonic Bath Cleaner Removing Soldering From Pcb Board

Guangdong Blue Whale Ultrasonic Equipment Co;Ltd

Contact Us

[China] country

Trade Verify

Address: Building 16 Golden Town Houjie Dongguan Guangdong China.

Contact name:Michael

Inquir Now

Guangdong Blue Whale Ultrasonic Equipment Co;Ltd

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

Digital 30l Ultrasonic Bath Cleaner Removing Soldering From Pcb Board

Country/Region china
City & Province dongguan guangdong
InquireNow

Product Details

 

30L Digital Ultrasonic Bath Cleaner Removing Soldering From The PCB Board

 

How Ultrasonic Bath Cleaner Works For You?

 

Ultrasonic cleaners are used in a wide range of applications to remove virtually any soil or contamination by using the power of cavitation action. This is the term used to describe the implosion of billions of minute bubbles contacting Nook Color components and surfaces. The bubbles are created by generator-powered ultrasonic transducers bonded to an ultrasonic cleaning tank and typically operate at an ultrasonic frequency of 37 to 42 kHz (37,000 to 42,000 cycles per second).

When the bubbles implode contaminants are quickly and safely removed from PCB surfaces without damaging delicate parts. So tiny are the bubbles that they penetrate minute cracks, crevices and blind holes that might lodge dried residue, dust and dirt particles. The ultrasonic PCB cleaning system will complete the job in as little as 10 to 15 minutes. And it will do it in an environmentally friendly manner because the ultrasonic circuit board cleaning solution formula is a biodegradable concentrate that minimizes disposal problems.

 

Data Sheet Of Z-S10:

 

Model:Z-S10

Capacity:30L

Tank size:500*300*200MM

Unit size:530*325*325MM

Ultrasonic power:600W

Heating power:500W

 

 

Customer's Feedback:

 

 

Cleaning Steps Of Ultrasonic Cleaning:

  1. Turn the unit on and activate the degas mode to thoroughly mix the solution and drive off trapped air. (This must be done each time you prepare a new bath of solution).

  2. Set the thermostat to the recommended formulation temperature.

  3. Wear protective gloves and use tweezers to place the parts in the bath.

  4. Set the timer to permanently on* and place the lid on the tank.

  5. At the end of the cycle remove and inspect the parts. Again: never reach into an operating ultrasonic bath. Wear gloves and/or use tweezers to handle the parts.

  6. If satisfied thoroughly rinse the parts to remove all traces of solution.

The solution must be replaced when cleaning efficiency drops. Drain and dispose of it according to local regulations. Follow user manual instructions to clean the tank before filling it with fresh solution.

Contact the ultrasonic cleaning experts at Whale cleen sonic for information on selecting the equipment and cleaning chemistry best matching your operations. We can also provide suggestions for ultrasonic cleaners used in electronic industry.

 

MORE OPERATING TIPS


Any contaminants that rise to the surface of the bath should be skimmed off and disposed of properly. When the circuit board cleaning solution becomes discolored or cleaning takes longer it is time to replace it. Drain the tank and dispose of the spent solution according to local regulations. Take the time to remove any material that settled to the bottom of the tank. Clean the tank using a cleaning process recommended by the manufacturer.

 

FAQ:

 

1. Can I Put Metal In?

Generally, yes. However, a notable exception is tungsten. This metal should not be put in ultrasonic cleaners because the cleaning process can damage it.

Whatever metals your jewelry is composed of, make sure to ask your jeweler whether it is safe to clean it with an ultrasonic cleaner as you never know what metals or alloys make up your jewelry.

2. What Can I Clean Using Ultrasonic Cleaners?

Metals such as gold and platinum are safe to clean with ultrasonic devices.

Hard natural gemstones can also be put into an ultrasonic cleaner provided that they have few inclusions and have not been treated with heat or chemicals.

Anyway, be sure to ask the jeweler at the time you purchase any piece of jewelry whether it can be cleaned with an ultrasonic cleaner.

There might be unsuitable alloys or gems, or some gemstones may have been treated, becoming more vulnerable in the process.

Hot Products

53 Liter 900W Medical Ultrasonic Cleaning Machine With Stainless Steel Structure 1. How Does it Work...
Surgical Equipment Glassware Anesthesia Respiratory Treatment Articles Medical Boiling Tank Boiling ...
Stainless Steel 304 Single Tank Ultrasonic Cleaner 1500W 28Khz For Medical Tools Cleaning Machine 1. ...
Blue Whale 20L Medical Ultrasonic Cleaner 20-80 Centigrade Degree Adjustable Concave Surface 1. Can ...
Glassware Anesthesia Respiratory Medical Ultrasonic Cleaner Boiling Water Disinfection Sterilizer 1. ...
150W Ultrasonic Vein Deposition Carbon Cleaning Equipment For Cleaning Carbon On The Engine Quick ...