Home Companies Wenzhou Hanlong Welding Machine Manu. Co., Ltd.

IMPROVEMENT) Inverter 200A AC/DC Pulse TIG/MMA Welder and 50A Plasma CutterSuper200P

Active Member

Contact Us

Address: 2nd Industrial House, Getian Village, Zeya Industrial Zone Ouhai

Phone: 86-577-86312345

Wenzhou Hanlong Welding Machine Manu. Co., Ltd.

IMPROVEMENT) Inverter 200A AC/DC Pulse TIG/MMA Welder and 50A Plasma CutterSuper200P

Country/Region China
City & Province wenzhou zhejiang
Categories Plasma Welders

Product Details


MMA/TIG/CUT welding machine (super200P)

Upon 6 months' improvement, we have successfully conquered the defect of SUPER200P in arc booster of cutting functioning. Now it can boost by HF and obtain the ablity to boost continuously, which enables it to cut 14MM thick steel plates when the current up to 50A. Generally, most of SUPER200P manufacturers have problems with its cutting function, so we think we are still very competitive in MMA/TIG. Now welding process is no longer a problem of us, we have done much research in super from other factories and we have successfully conquered the defect.

In the same way, in our research, we have encountered difficulties such as low high-frequency, hard arc-boosting, too high unloading,mosfet explosion, too much interference, etc. While we eliminated them one by one under our engineers' efforts. For example, before we can get rid of the problem of the explosion in mosfets which people think the hardest to conquer, we have done lots of researchs on Toshiba's and Fuji's mosfet and successfully figured out the root of the problem. Now we can say that Super-P is a mature product which can make customers' hope of buying one equals seven come true.

  • Input power voltage:AC220V±15%
  • Input voltage frequency:50/60Hz
  • Rate input Power capacitance:4.5KVA
  • Rate input current:20.7A
  • Range of output current:(TIG/MMA:20-200A)/(Plasma cuter: 15-50A )
  • No-load voltage:56/224V
  • Rate output voltage:18/100V
  • Pre-flow time:0-2S
  • Clean width:20-80%
  • Slope-down time:0-5S
  • Pulse width:10-90%
  • Range of pulse current:20-200A
  • Range of pulse frequency:1-70Hz
  • Post-gas time:2-10S
  • Remote control/Foot:YES-Foot or Trigger?
  • Arc-leading:HF vibration start
  • Efficiency:85%
  • Duty cycle:60%
  • Power factor:0.93
  • Insulation class:B
  • Protection class:IP21
  • cutting thick:0-14mm

Hot Products

welding machine: (ARC230) 1,Input power voltage(V): single phase 220V 2,Rated input power capacity...
welding machine:(TIG230) 1.Input power voltage/Frequency(VHZ): single phase 220±15% 50/60 2.Rated ...
welding machine:(TIG200) 1.Input power voltage/Frequency(VHZ): single phase 220±15% 50/60 2.Rated ...
Place of Origin China>>Zhejiang Input Voltage 220V Rated Current 180A Dimensions 510 x 275 x 510 mm ...
产品属性 Place of Origin China>>Zhejiang Input Voltage 220V Rated Current 120A Dimensions 510 x 275 x ...
产品属性 Place of Origin China>>Zhejiang Input Voltage 220V Rated Current 180A Dimensions 510 x 275 x ...