Single effect or multi-effect falling film evaporator mainly adapts
in continuous evaporation and concentration under low temperature.
Can process milk, glucose, starch, xylose, pharmaceutical,
biological engineering, environmental protection, waste liquid
recycling etc. Especially suitable for processing the material with
character of heat sensitive viscosity and foamability. The machine
has characteristics of heat transfer high, material heating In
Evaporator in every stage, seperator in every stage, condenser,
heat pressure pump, sterilizer, insulating tube, material transfer
pump in every stage, condensate water pump, work table, electric
meter control cabinet, valve, pipeline etc.
1.High heat transfer efficiency realized for the heating system
even heated with steam and feed liquid in flow evaporate The
equipment has smaller energy consumptionï¼steam consumption and
cool water circulation amount if equip with heat pressure pump.
2.Feed liquid evaporated while accelerated flow downward along the
pipe wall that suitable for evaporation and concentration of high
viscosity material Liquid heat in very short time for it inner film
evaporated in every tube That make the equipment very fit food
concentration can maximum protect food nutritious.
3.Whole process operated under vacuum condition Which meet the
sanitary requirement and environmental protection
requirementï¼Meanwhile can significantly reduce the evaporation
temperatureï¼If equipped with heat pressure pumpï¼part of second
steam will resucted and mixed with live steam .Steam pass through
pump ierred into heating shellï¼steam rapidly spread make liquid
soft heatedï¼is very suitable for concentration of heat sensitive
4.Equipment suitable for evaporation and concentration of
foamability material Liquid film evaporated in heating tube formed
liquid-vapor separate. Big part of feed drIiauid extracted from the
bottom of cylinder. Only small part of feel liquid and all second
steam enforced to separate Feed liquid not in big impacted no foam
formed in the whole process.
5.Equipment can also sterilize food Feed liquid flow to sterilizer
after preheated. Temperature up to 94and lasting for 24 seconds.
Then flow into first stage. Liquid evaporate in few seconds then
temperature drop at once.
Can equip with CIP cleaning system, achieve clean in spot,
Completed set operated easy without dead angl.
Can continuous feed materiaI and discharge material.
Can equip with automatic system, achieve automatic control of inter
and outlet material, discharge viscosity and cleaning. Can equip
with protection facilities in case of suddenly blackout, break down
which will cause trouble with heat sensitive products other
safeties, alarm facilities can achieve automatic operate and