Active Member
|
[China]
Address: Middle,South of Wire Mesh Industrial Zone,Anping County,Hebei Province,China.
Contact name:Cathy Tong
Anping Tianke wire mesh equipment Co., Ltd |
|
|
Diamond Type Expanded Plate Metal Mesh Machine for Filter Mesh in South Africa
Expanded Plate Metal Mesh Machine Description
This expanded plate metal mesh machine is mainly used for coining and stretching cold-rolled steel plate, aluminum plate and other metal material to hexagon, diamond, semicircle, diamond-semicircle combination and so on. The mesh is widely used in construction, hardware, machine tools, electronic industrial products, electrical appliances product protection and decoration.
The machine punches the plank material for tensile strength below 200 N/mm2, elongation above 25% of cold-rolled steel sheet or other metal materials.
This machine adopts crankshaft connecting rod mechanism to achieve the plate punching and shearing, cam achieve swing, feed device adopts stepper motor, it can adjust the feeding distance. The machine has simple structure, easy operation, stable performance.
Installation and Test of Expanded Plate Metal Mesh Machine
A: Installation of machine
1. Installation of machine see the basic drawing
2. Using gradienter revise when install the machine, the vertical and horizontal direction's tilt error below 0.001mm.
3. After leveling machine, foundation surface must be close to the bottom of the machine, especially the foundation bolts must be attached and padded, then tighten the foundation bolts.
B: Preparation before test run
1. After the installation, use gasoline to clean dirt everywhere.
2. Put through power supply, turn on the ground at the same time, first manually turn the pulley a round, second inching the power switch, check motor rotation direction is correct or not. The belt wheel motor should be clockwise rotation when face to it.
3. Install the V belt, and adjust V belt tightness.
4. Check each part of nut and bolt in the machine, shouldn't have loose situation.
5. Turn on the power distribution's controller power, pump oil and check whether the oil is flowing. The slide friction surface which does not automatically add oil, must add oil manually.
6. Set up the protective cover of the machine.
7. Inching motor, make the crankshaft rotate a circle. Check: if the machine has collision and uncoordinated situation or not. If the proximity switch is luminous in the crankshaft rotates 90 degrees from the bottom dead center or not. Longitudinal and horizontal feeding is harmonious or not.
Our Service
In order to guarantee the customers are able fully to operate the machine, if the customer need, we can help customer training, includes:
(1) Correct operating mode
(2) Correct maintenance way
(3) Remove simple proble
All the products of our company have already been widely used in metal products area.
Application of Expanded Plate Metal Mesh Machine
This kind of metal mesh is mainly used for ship building, mining, machinery, construction, transportation, oil, urban construction, hardware, protective and so on.
Packaging & Shipping
I. plastic film or bubble film which protect machine from rust on
the humid environment on sea
II. Spare parts are in wooden box
III. All devices will be fasten in container to avoid the shake on
road
Expanded Plate Metal Mesh Machine Parameter
| Model | TK25-16 | TK 25-25 | TK 25-40 | TK 25-63 | TK 25-100 | TK 25-160 |
| Material Thickness(mm) | 0.1-1 | 0.1-1.5 | 0.1-2.5 | 0.5-3 | 0.5-5 | 0.5-8 |
| Material Max.width(mm) | 1000 | 1250 | 1500 | 2000 | 2000/2500 | 2000/2500/3200 |
| Speed (times/min) | 220 | 200 | 110 | 75 | 60 | 50 |
| Feed distance(mm) | 0-2.2 | 0-3 | 0-6 | 0-6 | 0-10 | 0-10 |
| Mesh opening size LWD(mm) | ≤25 | ≤30 | ≤80 | ≤150 | ≤180 | ≤200 |
| Motor(kw) | 5.5 | 5.5 | 11 | 11 | 18.5/22 | 30 |
| Weight(T) | 2.2 | 3 | 7 | 11 | 13/15 | 18/20/26 |
| Size(mm) | 1.1*1.7*2 | 1.5*2.1*2 | 1.8*3.2*2.1 | 3.4*3.4*2.35 | 3.4*3.6*2.65 | 3.5*3.7*2.65 |
Expanded Metal Mesh Making Machine Details
Machine photo
Mesh hole flattening machine:this machine is used to flatten the surface of steel mesh.So the mesh will be beautiful.
CNC flattening cutting slitting machine: The machine is controlled by the CNC system. The length of the cut can be input in the computer. Feeding for servo motor, to ensure that the size of the cut-off is accurate.
Finished Products
