Active Member
|
[China]
Address: No. A-8 of Canda Venture Base, Xingan Road, Anping 053600, Hebei Province, China.
Contact name:Mirriam
Anping Baochuan Wire Mesh Products Co., Ltd. |
|
|
Q195 , Q235 , Q345 Wave Beam Guardrail High Fence Highway Products For Road
| Galvanized material | Zinc |
| Galvanized thickness | Average 85um, any point is not less than 61um |
| Exterior | Are complete, consistent color,smooth surface and pactical,no-sag, drip tumors, lumps and other defects |
| Impact test | Zinc layer does not peel off, no bumps, no cracking |
| Bending | No cracks, peeling and other phenomena |
| Zinc coating uniformity | 5 copper sulfate erosion, constant red |
| Salt spray | No corrosion phenomenon |
W-Beam Guard Railings are the most frequently used type of solid metal collision barriers for highway and roadway system supplied at economic cost. It features the symmetrical structure of two waves of the panels which are specifically designed to catch car bumpers and to reduce the severity of run-off-road collisions. It is fabricated from steel coil through a kind of rolling into the shape of a "w". The W shape beam panels and the blocking spacer work together to produce a good collision coefficient to absorb and reduce the vehicle energy in collision and in this way reduce the risk of harms.
W-Beam Steel Guardrail works in a system barrier composing with beams, terminal section and posts. The fencing system is installed and strengthened with block spacer, post cap, washer and bolts.
Steel Wire Cable Made Highway Barriers
Safety Barriers Made of Hot Dipped Galvanized Steel Strand Wire Cable
Guardrail Accessories and Parts: We also provide highway guardrail terminal ends, cable barrier end, crash cushion, guardrail post and other accessories including caps, bolts, nuts and offset blocks, etc.
Guardrail Brackets Galvanized & PVC Coated Steel Columns
Galvanized Steel Brackets PVC coated Posts
General Manufacturing Steps of Highway Guardrails:
Every step of our production from raw material to finished products are under careful quality control. Normally the guardrail panels going through the following steps:
Steel Plates: Material for Processing Flattening and Punching of
the Steel Plate
We choose choice cold steel strips as raw material Ensuring
Flatness for further processing
Hot Dipped Zinc Plating Process Steel Plates Fabricated into Waved
Beams
Surface Treatment: Galvanized Zinc Plating or Plastic Coating Metal
Fabricating and Shearing: Normally fabricated into two wave or
three waves
