Galvanized Gabion Box PE Coating
Regular size for gabion box
Wire diameter: 2.7X3.4X2.2mm, mesh size: 80X100mm, box size: 2X1X1m
Regular size for gabion mattress
Wire diameter: 2.2X2.7X2.2mm, mesh size: 60X80mm, mattress size:
3X2X0.3m
Regular size for gabion mesh roll
Wire diameter: 2.7X3.4mm, mesh size: 60X80mm/80X100mm, roll size:
2X50m
Material: Galvanized iron wire and PVC coated wire
Galfan ( 95%zinc-5%Alu Alloy ) low carbon steel wire, which has
good ability of resistance corrosion.
Mesh wire: 2.0mm-4.0mm
Mesh size: 6X8cm, 8X10cm, 10X12cm, 12X15cm, 16X18cm
Size: 1X1X1m, 2X1X1m, 3X1X1m, 4X1X1m, 2X1X0.5m, 4X1X0.5m
Applications:
1. Controlling and leading the river and flood.
2. Flood discharge and lead flow.
3. Rock fall defending.
4. Preventing the water and soil lost.
5. Protecting the bridge.
6. Reinforce fabric.
7. Seashore recovery project.
8. Seaport project.
Advantages:
1. Economic. Just put the stone into the gabion and seal.
2. Easily construct, no special technology needed.
3. Strong capacity of withstand nature destroy, rust-resistance and
atrocious weather resistance.
4. Affording Large scale distortion, but never be defeated.
5. The slit between the mesh and stone is good for the growth,
which can be the part of the environment
Around.
6. Excellent Penetrability, which can prevent from the whist by
liquid.
The material classification:
Galvanized steel wire: High quality low carbon steel wire, steel
wire of 2.0 MM to 4.0 MM in diameter, the tensile strength of steel
wire shall not be less than 380 mpa, hot galvanizing protection on
the surface of the steel wire, galvanized the thickness of the
protective layer of production according to customer requirements,
up to a maximum of 300 g/m2 galvanized quantity.
Aluminum zinc - 5% - mixed rare earth alloy wire: (also called gore
van) wire, this is a kind of international emerging a new a new
material, corrosion resistance is three times bigger than the
traditional pure galvanized, steel wire diameter of 1.0 MM to 3.0
MM, the tensile strength of steel wire shall not be less than 1380
mpa.
Specification List of Welded Wire Mesh |
Opening | Wire Diameter |
In inch | In metric unit(mm) | |
1/4" x 1/4" | 6.4mm x 6.4mm | 22,23,24 |
3/8" x 3/8" | 10.6mm x 10.6mm | 19,20,21,22 |
1/2" x 1/2" | 12.7mm x 12.7mm | 16,17,18,19,20,21,22,23 |
5/8" x 5/8" | 16mm x 16mm | 18,19,20,21, |
3/4" x 3/4" | 19.1mm x 19.1mm | 16,17,18,19,20,21 |
1" x 1/2" | 25.4mm x 12.7mm | 16,17,18,19,20,21 |
1-1/2" x 1-1/2" | 38mm x 38mm | 14,15,16,17,18,19 |
1" x 2" | 25.4mm x 50.8mm | 14,15,16 |
2" x 2" | 50.8mm x 50.8mm | 12,13,14,15,16 |
Technical Note: 1,Standard roll length: 30m;width: 0.5m to 1.8m 2,Special sizes available at request 3,Packing: in waterproof paper in rolls. Custom packing available
as request |
Welded wire Mesh |
Opening | Wire Diameter |
In inch | In metric unit(mm) | |
2" x 3" | 50mm x 75mm | 2.0mm,2.5mm,1.65mm |
3" x 3" | 75mm x 75mm | 2.67mm,2.41mm,2.11mm,1.83mm,1.65mm |
2" x 4" | 50mm x 100mm | 2.11mm,2.5mm |
4" x 4" | 100mm x 100mm | 2.0mm,2.5mm |
Technical Note: 1,Standard roll length: 30m;width: 0.5m to 1.8m 2,Special sizes available at request 3,Packing: in waterproof paper in rolls. Custom packing available
at request. |