Home Companies CHANGSHA SUPMETER TECHNOLOGICAL CO.,LID

Force Display Mini Weighing Indicator Controller For Loadcell Transducer Output

Active Member

Contact Us

[China]

Address: BUILDING A6, LUGU INTERNATIONAL INDUSTRIAL PARK,CHANGSHA, 410006, CHINA

Contact name:Lisa

CHANGSHA SUPMETER TECHNOLOGICAL CO.,LID

Force Display Mini Weighing Indicator Controller For Loadcell Transducer Output

Country/Region	china
City & Province	changsha hunan
Categories	Solar Chargers

Product Details

Force display mini weighing controller for loadcell transuducer output

Technical Specifications
 Power Supply: DC24V±20%, Max. 5W.
 Loadcell Excitation Voltage/Current: DC5V/120mA.
 8 Loadcells[350Ω] connectable.
 Transmitter Excitation Voltage/Current: DC12V/100mA.
 Optional weighing input signal mV, V and mA.
 【mV】Signal Input Range: 0~19.5mV.
 【V】Signal Input Range: 0~2.5V, 0~5V, 0~10V.
 【mA】Signal Input Range: 0~20mA.
 2 Normally open/closed Relays [DO]: AC250V/DC24V, 1A.
 1 Analog Signal Output [AO]: 0~20mA, 0.05%FS.
 COM1: RS232.
 COM2: RS485.

Technical Specifiction:

Power Supply	AC24V±20%
Display	5 Red Led Digital Tubes for English&Digit Display
Sampling Frequency	1280Hz
A/D Convert	24-bit
Keypad	4 keys for Shortcut mode operation with key tone
Excitation Voltage Output of Loadcell	DC5V
Max. Connection number of Loadcell	8 Loadcells (350Ω)
[mV]Signal Input Range	0-19.5mV
DO	2 Normally Open Transistor Switch Outputs
AO	1Analog Signal Output: 4~20mA.

Communication Port	COM1:RS232;COM2:RS485
Outline Dimension	107 × 60 × 100 mm (W×H×D)
Net Weight	Approx. 1.2kg
IP Grade	IP65

Verfication Accuracy	0.03%
Static Weighing/Force Measuring Accuracy	0.2%~.5~

Keypad Operation

Menu Operation
Key Name	Description
【■】	Enter Main Menu / Exit.
【8】	Enter / Save / Clear Alarm.
【►】	Cursor shifts right. Display the previous option.
【▲】	Display the next interface or option. Digit input: +1 ( 0~9 loop).

Quick Operation Mode A Parameter [904]= ‘0. dE’ [Default Set]
Key Name	Description
【■】*	Key-locking. Key-unlocking.
【►】 (【SET】)	Setpoint parameters setting.
【►】* (【ZERO】) (【→0←】)	[-ZEro]: Zero Calibration with Power-down Protection and Clearing Tare Weight. [≡ZEro]: Manual Zero without Power-down Protection and without Clearing Tare Weight. The controller will switch to Gross Weight display.
【▲】* (【TARE】) (【→T←】)	[≡tArE]: Manual Tare without Power-down Protection. [-PStr]: Preset Tare Weight with Power-down Protection. [-rStr]: Clear Tare Weight with Power-down Protection. The controller will switch to Net Weight display.
【8】 (【G/N】)	Gross Weight / Net Weight / Net Weight Peak Value display switch.
【8】* (【CLS】)	[-CLS] : Clear Screen [Clear the display value of Peak Hold Value].

Model Panel-mounting Operation Interface

Load Calibration (LoAd)

After doing Data Calibration, if there are conditions for Load Caliration, do Load Calibration with
loading standard weight on the weigher to correct Span Coefficient further for higher weighing accuracy.
The loading weight should be bigger than 50% of Scale Capacity value.

Main Display Interface