Active Member
|
[China]
Address: BUILDING A6, LUGU INTERNATIONAL INDUSTRIAL PARK,CHANGSHA, 410006, CHINA
Contact name:Lisa
CHANGSHA SUPMETER TECHNOLOGICAL CO.,LID |
|
|
Weight Indicator Bagging Controller For 25KG Packing Weighing
Control
Software Function
1. Manual Screen-locking/Screen-unlocking, Auto Screen-locking,
Digital Setting&Calibration and I/O Testing functions
available.
2. Zero Upon Power Up, Zero Auto-tracking, Manual/Auto Zero and
Zero Calibration available.
3. Load Calibration and Loss Calibration functions available.
4. 100 Recipes for packing control.
5. Optional ‘Auto Correct Inflight’ function.
6. Optional ‘Pause for Tolerance Alarm’ and ‘Auto Dribble Re-feed’
functions.
7. Optional ‘Batch Target Control’ function [With Batch Count
Target or Batch Weight Target finished, the packing process will
stop automatically].
8. Optional ‘Flow Control’ function for Bucket Scale.
Outline Size [W×H×D]
7”: 226.5 × 163 × 36 mm.
10.2”: 274 × 193 × 40 mm.
Error Messages
| Message | Alarm Cause | Solution |
| RAM Fault | The chip RAM is damaged. | Replace the chip RAM. |
| EEPROM Fault | The chip EEPROM is damaged. | Replace the chip EEPROM. |
| Parameter Error | The chip EEPROM is damaged. | Replace the chip EEPROM. |
| Weighing Signal Error | Weighing signal reversed or not connected. | Connect the loadcell correctly. |
| ADC Fault | The chip ADC is damaged. | Replace the ADC module. |
| Over ADC Range | Weighing signal exceeds A/D conversion range. | 1. Check if the loadcell is connected. |
| Overload Alarm | Weight > (Scale Capacity + 9 × Scale Division). | 1. Check if the set value of parameter [102] ‘Scale Capacity’ is
reasonable. |
| Internal Data-bus Fault | Please contact manufacturer. |
Power Supply Terminal
| No. | Pin | Description |
| DC24V | DC24V[±20%] Power Input Port | |
| 1 | － | DC Input -. |
| 2 | + | DC Input +. |
| For separating the controller from the interference of the driving devices, the DC24V power supply of the controller should not be shared by the DI/DO. | ||
Installation Mode
Size Option:
7 Inch One:
Outline Size [W×H×D]: 226.5 × 163 × 36 mm
Panel Cut-out Size [W×H]: 215 × 152 mm
10 Inch One:
Outline Size [W×H×D]: 274 × 193 × 40 mm
Panel Cut-out Size [W×H]: 261 × 180 mm
System Diagram For APP1.1 1-Bucket Scale
System Diagram For APP1.2 2-Bucket Scale[1-scale]
System Diagram For APP1.3 2-Bucket Scale[2-Bag]Mode
Delivery
