|
[China]
Trade Verify
Address: No. 2, Qingyuan South Road,Langli Industrial Park, Changsha County,Hunan Province
Contact name:Amy
Hunan Yibeinuo New Material Co., Ltd. |
|
Verified Suppliers
|
|
|
Product Description
Wear resistant elbow pipe lined with alumina ceramics has become one of the most widely used wear-resistant materials for its high wear resistance, high hardness, oxidation resistance, good corrosion resistance, and extremely high resistance to high and low-temperature strength. Customization, sample service
Product parameters
| Items | Specifications | |
| Al2O3 | ≥95% | ≥ 99% |
| Density | >3.8g/cm3 | >3.83g/cm3 |
| HV10 | ≥1200 | ≥1300 |
| Rock Hardness HRA | ≥85 | ≥90 |
| Bending Strength MPa | ≥330 | ≥340 |
| Compression strength MPa | ≥1200 | ≥1300 |
| Fracture Toughness KIc MPam 1/2 | ≥4.0 | ≥4.2 |
| Volume wear | ≤0.02cm3 | ≤0.01cm3 |
Product Features
1. High hardness: The ceramic lining of the wear-resistant elbow has a Rockwell hardness of HRA80 90, which is second only to diamond and far exceeds the wear resistance of wear-resistant steel and stainless steel.
2. Excellent wear resistance
3. Lightweight: Its density is 3.6 3.9g/cm3, which is only half of that of steel, which can greatly reduce the equipment load.
4. Firm bonding and good heat resistance
5. Wear resistant elbow lined with ceramic pipe for impact resistance
6. Ceramic dislocation installation
7. Long service life
8. Wear resistant elbow lining ceramics that are widely used in the industry
Our Advantages
1. Wear resistance: The Al2O3 content in the ceramic layer of the wear-resistant elbow lining is between 92% and 99%, and its wear resistance is ten times higher than that of the quenched medium carbon steel, which is better than that of tungsten carbide.
2. Corrosion resistance: the ceramic of the wear-resistant ceramic tube is a neutral material with stable chemical properties
3. Excellent heat resistance
4. Easy to weld: resistant ceramic pipes can be connected by welding outer steel pipes.
5. Convenient transportation and installation: relatively lightweight and easy to transport and install.
Factory introduction
The company has kiln production lines, vulcanizers, CNC cutting machines, lathes, punching machines, milling machines, sawing machines, radial drills, forklifts, gas-shielded welding, intermediate frequency pipe benders, and other production and processing equipment, forming a certain scale of production capacity
Production equipment
The company has advanced wear-resistant ceramic production lines, isostatic pressing, automatic presses, vulcanizing machines, spray drying towers, etc., as well as steel structure production lines.
