|
[China]
Trade Verify
Address: No. 8, Wenqu Road, High-tech Zone, Hefei, Anhui
Contact name:Larry
Anhui Wanyi Science and Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
Automatic Vacuum Chamber Helium Leak Detection System for Lithium Battery
Product Introduction
The vacuum acuum leak detection systems are used for the rapid and accurate detection of helium or hydrogen by vacuum helium injection, suction lance, helium hood and back pressure detection methods for industrial testing in a variety of demanding and harsh environments.
Product Parameter
| Automatic Vacuum Chamber Helium Leak Detection System for Lithium Battery | ||
| Workpiece | Metal bipolar plates, Membrane electrode | |
| Product Size | 4500*2000*2000mm/Customized | |
| Power | 20KW | |
| Weight | 3000KG/Depends on real item | |
| Leak detector opening detecting pressure | ≤30pa | |
| Workpiece Evacuation pressure | ≤2000pa | |
| Helium leak detector parameters | Display ranges | 1.0*10-3~10-13 Pa.m3/s |
| Minimum detectable leakage rate | 5*10-13 Pa.m/s | |
| Response Time | <1S | |
| Leak rate control setting | Set up on the system according to your process requirements | |
| Overkill Rate | ≤1% | |
| Leakage rate | 0 | |
| Equipment failure rate | ≤1% | |
| Yield rate | ≥99.9% | |
| Leak detection tempo | ≥3PPM | |
| Motro Power | 600 W | |
| Ultimate pressure | 1000 Pa | |
Product Performance
1. The size of Accept your customized sizes of vacuum chamber, equipment size and layout
2. High-end configuration, standardized design and production, and
stable and reliable performance;
3. The multi-chamber linkage design can realize flexible
production, and the production rhythm can reach 6PPM-20PPM per
unit;
Product Application
Power switchgear, ring main unit, pole top switch, power castings
