Anping County Hengyuan Hardware Netting Industry Product Co.,Ltd. |
Verified Suppliers
|
|
Profile wedge wire screen filter is a metal filter product with
high mechanical strength and a self-supporting structure.
It is made of two parts: a V-shaped profile wire and T-shaped
(triangular) support rod, which is welded through the ring fusion
welding process.
The profile wire is the filtering surface, and the supporting rod
plays a supporting role.
Compared with other metal filter cores: Firm structure, stable
filtration accuracy, not blocked, high opening area.
1. V wire structure, the small contact area between impurities and
screen.
So it has the property of not blocking and easy to
clean.
2. Adopt the most advanced ring fusion welding technology on the
market at present.
Compared with other kinds of metal filtration
products, its strength is greater.
3. Stable filtering accuracy
As for the metal mesh filter, with the use time
increases, the filter layer will be seriously worn, the hole
diameter will change, and filtering accuracy will change
greatly. The wedge filter element does not have this
problem.
4. Pressure drop.
Low-pressure loss, energy saving.
5. Large opening area.
Continuous slotting structure, therefore, compared with
other kinds of metal filter elements, its opening area is larger.
6. High capacity & flow rate.
Name | Profile Wedge Wire Screen Filter |
Material | Stainless steel 304, 304L, 316L and 321 etc. |
Profile Wire | 1.0 *2.0 mm 1.5*2mm 1.5*2.5mm 2*3mm 2.3*3.5mm 2.2*4mm 2.2*4.5mm,3*4.6mm,3*5mm etc |
Support Rods | 2*3mm 3*4mm 3*4.6mm 3*5mm 3*6mm 4*7mm |
Round | From 2.5mm to 6.0mm |
Slot Size | 0.025mm, 0.15mm, 0.25mm, 0.3mm ... 100mm etc |
Pipe Length | Max 6 meter |
Pipe diameter | 25mm to 1300mm |
Screen Ends | Plain Beveled ends, male/female threaded, flange or close up. |