Soil Testing Geotechnical Exploration Drill Rigs Portable Small
Engineering Machine
GK200 Brief introduction of drilling rig
GK200 Core drilling rig is suited for the applications of general
exploration and investigation, geophysical prospecting. Road and
construction survey, blast holes and other drilling operations.
With hydraulic automatic feeding device. Elevated drilling
efficiency.
The holding mechanism with upper spherical jaws is used as
substitute for chuck. The rod can be replaced without shutdown.
Centralized handle, easy operation, safe and reliable.
The drilling machine,pump and diesel engine are installed on a
common base frame in order to have a compact structure and occupy
small field area.
GK200 Hydraulic Portable 200m Water Well Drilling Machine
Drilling depth | 200m |
Open hole diameter | 75-300mm |
End hole diameter | 75mm |
Active drill rod | 53/59*4200mm |
Rod diameter | 50,60mm |
Drill angle | 90°-75° |
Matched power(diesel power) | 15kw/2200r/min |
Dimension | 2800*950*1700mm |
Engineering Drilling Rig Features:
1.With hydraulic feeding device, elevated drilling efficiency,
reduced labor strength.
2.The rig is equipped with an upper spherical jaw holding mechanism
and hexagonal drive drilling rod which can be replaced without
shutdown, high efficiency, safe and reliable.
3. A hole bottom pressure gauge is mounted indicating the pressure
in order to control the status inside the hole.
4.Compact structure, small volume, lightweight, high detachability,
easy transportation and suitable for the operations in plains
Engineering Drilling Rig structure
The structure of the drilling rig is compact and simple. All parts
of the drilling rig, including drill pipe, can be transported by a
5-ton truck. In areas with inconvenient traffic conditions, it can
be transported by manual or pack horse through the trail, which can
greatly save the investment in building temporary roads, shorten
the exploration period, save labor and reduce the handling risk and
cost. The drilling rig adopts hydraulic drive, modularization, safe
and reliable structure, easy operation, reduced labor intensity and
more humanized; The airport uses 12V DC power supply, which is
safer; When the machine is moved, it is easy to disassemble and
install, and it is easy to complete the moving of the drilling rig.
The angle of the drilling tower can be adjusted in the range of 45
° ~ 90 °, and the drilling rig can carry out inclined hole drilling
of - 45 ° ~ 90 °, without tower operation, so as to reduce the
safety risk of tower operation and increase the safety factor of
operation.
Engineering Drilling Rig advantage
It is especially suitable for construction in the environment of
large cutting in mountainous terrain or in forest areas. The
installation of drilling rig only needs 4 × 4m or even smaller flat
site. There is no need to build temporary transportation roads,
solve the massive excavation of earth and stone or cutting down
more trees during leveling machine, reduce the damage to vegetation
and environment, and reduce the amount of compensation for
temporarily leased land for drilling, so as to protect the
construction site and surrounding environment to the greatest
extent.