Water transfer screen printing paper for Glof clubs blue 480*610
Summary
Water transfer paper is a transfer material in the
water transfer technology as an intermediate carrier. It is a
special kind of polymer material. It is mainly composed of three
layers, the lower layer is the base paper, the middle is the
filmable adhesive layer, the upper layer is the aqueous sol layer.
Water transfer technology can apply colorful
graphic to any irregular product, helping manufacturers print on 3D
products.Film graphic can be animal skin ,carbon
fiber,wooden,skull,flowers Patterns etc.
Description
- Color: blue
- Size: 480*610mm
- Flatness: Flat, no curl
- Printing adaptability: Overprint is accurate, no deformation at
room temperature 25 ℃ ± 5 ℃
- Paper material: Pure wood pulp base paper, environmental protection
stains, water-soluble environmental resin (non-synthetic)
- Printing environment requirements: Temperature 20-25 ℃, relative
humidity 40-
- Paper thickness: 160g: 220u ± 10u
- Product environmental testing: This product meets and fully
complies with the ROHS
Advantage
- Smooth surface, no concavities
- Soaking time: Decals can be slippery after soaking for 5 ± 1s
- Post adaptability: Good drainage, good slip, moisture and bubbles
easy to exclude
- uniform layer, no leakage of gelatin
- Curled to stretch time: 5 ± 1s
- Separation time after soaking: 5 ± 1s
- Total dehydration time: 10 ± 2s
- Paper stability: Without resin left on the decal, not fade when
soaked in water, not pollute decals
efficient to remove, no residues after removing, no print of the
paper and no stain after decoration firing.
Application
it can use for the golf clubs,and can ornament your golf
clubs very beautifull and unique,so that you can distinguish your
golf clubs from others,and also let you have fully confidence to
win the competition.
Process:
- Print the design on decal paper by any model of laser printer or
inkjet printer.
- Paper immersion. Put the decal paper in water (20° C~30° C),
immersing 10 seconds, until the film could be slipped. Attention to
do not immerses the decal paper too long; Otherwise it will
dissolve the glue and covered on paper.
- Logo transfer. First of all clean the objects surface, transfer the
logo on the objects then squeezed and wiped it tightly.
- Dry. If the transferred object is made of metals, ceramics and
glass etc, roasted by 140 with 20 min; Plastic items by 70 with 60
min
- Finished products. After drying, coat the paint onto the object
surface, nature dry by 12hours, which keep the object and pattern
together firmly.
Package and delivery
we will use the stander export carton to make sure the
goods is not damaged., we can provide goods within a week if we
have enough raw materials at store.