Dimmable Motion Activated Bed Light LED Strip for Bedroom Night
Light Amber for Baby
* special supply for Amazon /Ebay /Aliexpress hotselling
* Auto turn on / off by the intelligent motion sensor detected.
* Dimmable and Lighting time adjustable.
* Easy Installation with DC connector on both of the end of strip
light and power adapter.
* Connection Cable total length is more than 60 inches, in case of
the outlet wall plug is not so close.
* There are 2 small clips for cables management, if the cable
length is excess.
* Connection: Power Adapter + Motion Sensor + LED Strip Light
* Clean the dust, ensure the paste place under the bed frame is free
from dust before installation to avoid falling off.
* Remove the 3M adhesive backing on the strip.
* Stick the LED light strips on the bedside with the 3M adhesive
* The Motion Sensor could only be detected in DARK environment.
* Please peel off the 3M adhesive tape and heat it by the hair
dryer when the environment temperature is below 68°F, then its
pasting effect will be better.
* Please remember to clean the installation surface first when you
use the 3M adhesive tape. There is a small clip in the parcel, you
have to get it to hold the end of the light strip which with the
wire to avoid falling off.
|Description||LED strip 3528 Motion Activated Bed Light|
|Light Source||3528 SMD Chips|
|Power||4.8 Watts / Meter|
|Input Voltage||DC 12 Volt|
|Sensor Detected Distance||4M|
Sensor Detected Angles
|Lighting contined time||30-600 seconds|
|Power Adapter Voltage||AC220 or AC110|
|Remarks||Customized / OEM available|
1 × 2M LED Strip Light
1 × Motion Sensor
1 × LED Power Supply
1 × 3M Adhesive Tape
2 × Cable Management Clips
Motion Activated point such as Bedroom Night Light Amber for Baby,
Crib, Bedside, Stairs, Cabinet and Bathroom under the counter or cabinet, night light in the
nursery room, convenient lighting inside the camping tent etc.
customized size and requirements available such as 1m /2m /5m
lenght with or without remote controller