Active Member
|
[China]
Address: Tower A , ShenHe Innovation Park ,Xiangyang Industrial ,Liushi Town ,Yueqing , Zhejiang Povince,China 325619
Contact name:IDa
YUEQING HONGXIANG CONNECTOR MANUFACTURING CO.,LTD. |
|
|
Brass Metal Cable Gland Accessories Electroplating Hexagonal Screw Plugs
Material: excellent brass plated nickel.
Working temperature: -40 C ~+100 C
Product characteristics: for the preparation of the hole cargo surplus Kong Saiping, make products beautiful, waterproof, acid and alkali, grease and other general solvents.
Color: metal color.
Suitable method:
1. corresponds to the tooth gauge on the equipment, the housing type screwdriver is rotated and tightened.
2. corresponds to the aperture suitable for the equipment, fixed with nylon fixing nut and waterproof rubber gasket on the opening.
Applicable scope:
For power electronic control equipment, military industry, oil, chemical, explosion-proof, textile, medical, aviation communications, machine tool and equipment manufacturing, measurement and control technology, instruments and instruments and other industries with package plastic hose, cable, wire joints.
Characteristics
The products are suitable for cable connection of circuit, electric
box and transportation equipment, industrial machinery and
equipment, wind energy industry, solar energy industry and so on.
| Item | GL mm | Height H mm | Spanner Size mm |
| PG7 | 5 | 8 | 14 |
| PG9 | 6 | 9 | 18 |
| PG11 | 6 | 9 | 20 |
| PG13.5 | 6.5 | 9.5 | 22 |
| PG16 | 6.5 | 9.5 | 24 |
| PG21 | 7.5 | 11 | 30 |
| PG29 | 8 | 12 | 40 |
| PG36 | 9 | 15 | 50 |
| PG42 | 10 | 16 | 57 |
| PG48 | 10 | 16 | 64 |
| M8×1 | 5 | 8 | 12 |
| M10×1 | 5 | 8 | 12 |
| M12×1.5 | 5 | 8 | 14 |
| M16×1.5 | 6 | 9 | 18 |
| M18×1.5 | 6 | 9 | 20 |
| M20×1.5 | 6.5 | 9.5 | 22 |
| M22×1.5 | 6.5 | 9.5 | 24 |
| M24×1.5 | 6.5 | 10 | 27 |
| M25×1.5 | 6.5 | 10 | 27 |
| M30×1.5 | 6.5 | 10 | 32 |
| M32×1.5 | 7 | 11 | 36 |
| M36×1.5 | 8 | 12 | 40 |
| M40×1.5 | 8 | 13 | 45 |
| M50×1.5 | 9 | 15 | 55 |
| M60×1.5 | 10 | 16 | 64 |
| M63×1.5 | 10 | 16 | 68 |
| M72×2 | 10 | 16 | 78 |
product introduction
| Cable gland | Waterproof metal cable gland type | Large type cable gland, large range type cable gland, small range type cable gland, length type cable gland, strengthened type cable gland, direct type cable gland, multiple-entry type cable gland, high temperature resistance type cable gland, double locking type cable gland, spiral type cable gland, 90º flexible pipe connector, EMC cable gland, and explosion proof cable gland, etc. |
| Nylon cable gland type | Conventional type cable gland, split type cable gland, anti bending cable gland, corrugated tubing cable gland, nylon union for flexible pipe and hose cable gland, etc. | |
| Marine cable gland type | DCG single compression type cable gland, JIS standard type cable gland, TJ clamping type cable gland and TH welded type cable gland, etc. | |
| Others | Flexible Pipe type | PP/PA flexible pipe, metal flexible pipe, bellows fixed frame, etc. |
| Vent valve series | Breathable vent plug and breathable cable gland, etc. | |
| Accessories | Brass reducer, brass enlarger, standard locknut, EMC locknut, brass screw plug and waterproof junction box, etc. |
Installation attention
conductor connection conductor connection requires low resistance
and sufficient mechanical strength, and no sharp corners can be
found at the junction. The middle and low voltage cable conductor
connection is usually pressed.
(1) choose suitable conductor and connecting tube with electrical
conductivity and mechanical strength;
(2) the gap between the inner diameter of the pressure pipe and the
outer diameter of the connecting core is 0.8~1.4mm.
(3) the resistance value of the joint after crimping shall not be
1.2 times higher than that of the equal section conductor, and the
tensile strength of the copper conductor joint shall not be less
than 60N/mm2;
(4) before crimping, the outer surface of the conductor is coated
with conductive adhesive on the inner surface of the connecting
pipe, and the oxide film is destroyed by a wire brush.
(5) sharp corners and burrs on connecting pipes and conductor
conductors, smoothing with files or sandpaper.
Our cable gland has a wide range of uses, which can be used to connect the LED lamp line interface, the laying of the circuit cable, the connection of the electric box cable; it can also be used in the cable connection of the manufacturing industry equipment, the line connection of the robot industry, the connection of the charging pile line, and the application in the new industries such as wind energy and solar energy. The cable connector has corrosion resistance and can be applied to marine operations, chemical equipment and so on.
FAQ
Q: Are you trading company or manufacturer?
A: We are the factory. Also we can export the goods by ourselves.
Q: How long is your delivery time?
A: Generally we can send out the the goods within 3-7 days if the goods are in stock. Or it is should be 7- 30 days if the goods are not in stock, it is according to your order quantity.
Q: Do you provide samples? Is it free or extra?
A: Yes, we could offer the samples for free charge but do not pay the cost of freight.
Q: What is your terms of payment?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance, balance before shipment.
Q: How about the after-sale service?
A: Any feedback or comments are welcomed. We will try to make the best assistant to let you maximum satisfaction.
