Active Member
|
[China]
Address: Building B1, Block B, Qingdao Industrial Technology Research Institute, No.17 Songyuan Road, Qingdao High Tech Zone,Qingdao,China
Contact name:Jason Sun
Qingdao HuaYun Air Technology Co., Ltd |
|
Cabinet Style Wet-membrane Humidifier
Industrial Wet membrane Air Humidifier Indoor Wet Membrane Humidifier for Central air conditionning
Working Principle
Wet film humidifier using the water evaporation, the water was constantly sent to the upper part of the wet film through the water pump and the dispenser.
Under the action of gravity, the water goes through the wet film back to the main tank to form a circulating process. When the air goes through the wet film with its full contact, the dust and other particulate matters are filtered. Thus, the air is purified, and the humidity increases. In this way, it achieves the purpose of humidification, purification, and dust-suppression.
Clean tap water or chilled water through a water inlet pipe to the wet film humidifier lower circulation water tank, the water enters the water tank is composed of float valve and liquid level switch to control. The water in the water tank by a water pump to wet film on top of the water distributor, through wet membrane water distributor will be uniform water distribution, water under the action of gravity along the wet membrane surface flow down the wet film, wetting, penetrating, when the air through the wet film during its increased humidity, temperature drop, another part without evaporation water from the humidifier bottom back to the water tank; the water in the water tank through a circulating water pump using repeated cycles, the wet film humidification of air. In this way, to achieve the purpose of saving water. When the circulating water level in the water tank of water drop, switch to open, to ensure water tank, the water level of the water tank is maintained at a set height range; when the circulation of the water level in the tank falls to a certain height, the water tank of the low water level switch, ensure the circulating pump in the absence of water stop. In the process of temperature and membrane water evaporated part, but does not consume additional energy.
Industrial Wet membrane Air Humidifier Indoor Wet Membrane Humidifier for Central air conditionning
Technical Parameters
| Model No. | Spraying Volume. | Power | Tank Capacity | Circulation Air volume | Coverage Area |
| UY-M06 | 6L/h | 180W | 55L | 2500m³/h | 10-80㎡ |
| UY-M12 | 12L/h | 330W | 55L | 5000m³/h | 80-150㎡ |
| UY-M20 | 20L/h | 330W | 75L | 5000m³/h | 150-200㎡ |
| UY-M30 | 30L/h | 480W | 75L | 7500m³/h | 200-300㎡ |
| UY-M OEM | Can be equipped with the remote control, data upload, improve the moisture content of the product | ||||
Industrial Wet membrane Air Humidifier Indoor Wet Membrane Humidifier for Central air conditionning
Main Features
Industrial Wet membrane Air Humidifier Indoor Wet Membrane Humidifier for Central air conditionning
Main Applications:
Industrial Wet membrane Air Humidifier Indoor Wet Membrane Humidifier for Central air conditionning
Industrial Wet membrane Air Humidifier Indoor Wet Membrane Humidifier for Central air conditionning
Industrial Wet membrane Air Humidifier Indoor Wet Membrane Humidifier for Central air conditionning
Qingdao HuaYun Fog Technology Co., Ltd is a company that integrated to the development, production, sales and agency to provide the fogging products and also the spray system. Our aim is to make the production process more energy saving and more intelligent. With the concepts Serve in China, Eye On The World, We are engaged to be one of the most valued companies in the spraying products. Our main products ranged as below,
1.) Dry fog Industrial Humidifier Series
2.) Ultrasonic Industrial Humidifier Series
3.) Ultrasonic Atomization chips
4.) Advanced High Pressure Water Misting System
5.) High Pressure Misting Nozzles
6.) Cntrifugal Humidifier Misting Fans
Our main products list,
FAQ:
Q1. How To Order ?
Step 1 : Send an inquiry
Step 2 : Confirm the operating conditions
Step 3 : product recommendation and quotation
Step 4 : sampling
Step 5 : confirm order details and make a payment
Step 6 : proceed with product preparation upon receipt of payment
Step 7 : shipping
Q2. How To Pay ?
We accept the following payment methods
1. T/T (Bank Transfer)
2. Western Union
3. Paypal
Q3. How Do We Deliver ?
1. We ship products through major carriers like FedEx, UPS, TNT,
EMS.
2. Sea shipment service available. (MOQ 1CBM)
Q4. What's The Lead-time ?
| Lead-Time Chart | |
| QUANTITY ( PCS ) | Lead-Time |
| 100 | 3 Working days |
| 1,000 | 7 Working days |
| 3,000 | 10 Working days |
| 5,000 | 15 Working days |
| 10,000 | 20 Working days |
Q5. How Long Does It Take To Receive Shipment ?
It depends on where the buyer is located and which service is
chosen.
Guidelines delivery times:
1. Priority Express (FedEx, UPS, TNT) : 1 ~ 3 working days
2. Economy (FedEx, UPS, TNT, EMS) : 3 ~ 9 working days
Q6. How To Track The Shipment ?
On the day we dispatch the shipment we will send a shipment notice
which includes the tracking number.
Q7. What Are Our Product Warranty Policies?
We provide a 12 month guarantee.
During the guarantee period we will replace defective goods and/or
spare parts at our own expense,
only if the responsibility is solid confirmed as ours after
investigation and discussion agreed by both
sides.
Q8. Why Choose Ucloud high pressure water misting Nozzle ?
We've been devoting ourselves to nozzle manufacturing for more than
30 years,
and have been working with top-notch customers from countries
including Japan and many in Europe and North America.
We enjoy a good reputation among existing customers for outstanding
stability
resulting from strict and consistent quality checks and production
controls.
We trust we're fully capable of satisfying your high-end
requirements and meeting your high standards.
Q9. How to contact with us ?
Contact Person: Jason Sun
Email: 18669741981@gmail.com
Tel (What's App): 0086-18669741981
Skype: qingdaosjm0319
