JLSF-3HP Industrial Water Chiller For Injection Molding Machine

JLSF-3HP Air Cooled Water Chiller Injection Molding,Blister,Blow Molding,Compression Molding

Product Description:

A small air-cooled chiller is a piece of equipment used for refrigeration, usually in small to medium sized commercial or industrial applications. It uses a fan to blow ambient air across the cooler, which removes heat from the chiller and allows the coolant to circulate, reducing the temperature.

Small air-cooled chillers typically include a compressor, a condenser, an expansion valve, and an evaporator. The compressor compresses the refrigerant into a high-pressure gas, which is then sent to the condenser, where a fan blows the surrounding air through it, thereby removing the heat. The refrigerant becomes a low-pressure liquid and then enters the expansion valve, where the reduced pressure causes the refrigerant to evaporate, absorbing heat, which cools the water or other fluid in the evaporator.

Small air-cooled chillers are easier to install and maintain than water-cooled chillers because they don't require pumps, cooling towers, or water piping. However, they usually require more space to be placed because they need enough space to dissipate heat.

Working Principle:

The working principle of the small air-cooled chiller is similar to that of a general refrigeration cycle system, and its main components include a compressor, a condenser, an expansion valve, and an evaporator.

1.Compressor: The compressor is the core component of the chiller, and its function is to compress the refrigerant into a high-pressure gas. High-pressure gas generates heat during compression, which needs to be discharged through the condenser.

2.Condenser: The condenser is a component used to dissipate heat from the refrigerant. When the high-pressure gas passes through the condenser, the surrounding air is blown by the fan, which lowers the temperature of the refrigerant and discharges the heat. In this way, the refrigerant changes from a high-pressure gas to a low-pressure liquid.

3.Expansion Valve: An expansion valve is a small throttling device that controls the flow of refrigerant. When the refrigerant passes through the expansion valve, the pressure and temperature of the refrigerant will decrease due to the shrinkage of the valve, so that the refrigerant becomes a low-pressure liquid.

4.Evaporator: An evaporator is a component used to cool water or other fluids. When the refrigerant enters the evaporator, it absorbs heat from the evaporator, causing the temperature of the water or other fluid in the evaporator to drop. The refrigerant becomes a high-pressure gas again, and a new refrigeration cycle begins.

During the entire refrigeration cycle, the fan plays a very important role. It discharges heat by blowing the surrounding air through the condenser, so that the refrigerant can be continuously cooled and depressurized in the cycle, and it also ensures that the refrigerant is evaporated. The heat absorption effect in the device.

Techinical Parameters:

Application Industry:

It is widely used in pharmaceutical, chemical, food, grease, coating, electroplating, cold storage, plastic, chemical fiber, commercial concrete, laser, purification workshop, mechanical processing and other industries. It can precisely control the temperature required by modern industrial manufacturing, greatly improving efficiency and product quality. JIALIS chiller is easy to operate, reasonable in design and superior in quality, with more than 100 models, it is the best choice for modern industrial refrigeration.
 

  Automotive Manufacturing          Chemical Engineering              Electronics Industry                 Electroplating Industry