Active Member
|
[China]
Address: Room 1704, No.54 street 4, AoYuanKangWei Plaza，Xintang town, Zengcheng, Guangzhou, China
Contact name:Maggie
Guangzhou Jieming Water Treatment Equipment Co., Ltd. |
|
|
Industrial Nature Soft Water Softener / Automatic Water Softener 3W-40W
Andorra purely water FRP Water softener Manufacturer FRP Water softener Manufacturer
1. Principal: Industrial water softener for water treatment
When raw water with rigid ion passing resin in the exchanging cylinder, Ca2+,Mg2+ in water is exchanged and absorbed by Na+ in resin, wiping off Ca2+,Mg2+ and carbonate or non carbonate rigidity, is called softened water. The resin must be regenerated after absorbing some Ca2+,Mg2+, regeneration is washing resin layer using brine in salt box. Na+ in salt water exchange the rigid ion of resin into water, then discharged with regeneration liquid off the cylinder, recovering exchanging capacity, and continuously softening water.
Industrial water softener allows water equipment (boiler, radiators, water heaters, solar, etc.) will never scale, congestion and make it has a longer life. Put an end to security risks and equipment loss. Bathroom facilities(Glass shower room, mirror, bathtub, toilet, etc) use soft water, it will no more difficult to clean up the white stains and rust spots.In life we can save a lot of energy and trouble, and lady commonly used soft water bath have a good cosmetic effect.
Industrial water softener is belongs to daily using water, can not get rid of impurities, bacteria, viruses and heavy metals in the water. And its main function is softened water, not directly for drinking, general it need to use with drinking machine (Water purifier), so that to settle the problem of drinking water.
2. Features: Industrial water softener for water treatment
(1) Easy installation and low maintenance
(2) Long life and great performance
(3) Manual Valve or Fleck Valve available
(4) SS Jacket available
3. Applications: Industrial water softener for water treatment
(1) Make-up water for boilers
(2) Cafeteria-food service
(3) Classroom Labs
(4) Cooling towers
(5) Pools Ice Machines
(6) Vending machines
(7) Fountain Service
(8) Drinking water
(9) Facility Use
(10) Vehicles Wash
JM-Fleck valve system selection table(only for reference):
| NO. | Water softener | Flow rate | Description ( Details) | Spec. | Q’ty | |
| Model | T/H | |||||
| 1 | JF-5600ST | 0.5-1T/H | 1. FRP TANK(125PSI) | φ205×1130-2.5"top, 8"*44"-2.5" NPSM | 1 | |
| 2. Top & bottom strainers | Adapted for tank 8"*44"-2.5" NPSM | 1 | ||||
| 3. Control valve | 5600ST | 1 | ||||
| 3.Resin, 001*7 | 25 L/bag | 1 | ||||
| 4. Brine tank, with all accessories | 60L | 1 | ||||
| 5, Brine valve | 434 | 1 | ||||
| 2 | 1-1.5T/H | 1. FRP TANK(125PSI) | φ255×1390-2.5"top, 10"*54"-2.5" NPSM | 1 | ||
| 2. Top & bottom strainers | Adapted for tank 10"*54"-2.5" NPSM | 1 | ||||
| 3. Control valve | 5600ST | 1 | ||||
| 3.Resin, 001*7 | 25 L/bag | 2 | ||||
| 4. Brine tank, with all accessories | 60L | 1 | ||||
| 5, Brine valve | 434 | 1 | ||||
| 3 | 1.5-2T/H | 1. FRP TANK(150PSI) | φ300×1650-2.5"top, 12*65"-2.5"NPSM | 1 | ||
| 2. Top & bottom strainers | Adapted for tank 12*65"-2.5" NPSM | 1 | ||||
| 3. Control valve | 5600ST | 1 | ||||
| 3.Resin, 001*7 | 25 L/bag | 4 | ||||
| 4. Brine tank, with all accessories | 100L | 1 | ||||
| 5, Brine valve | 434 | 1 | ||||
| 4 | JF-2750ST | 2.5-4T/H | 1. FRP TANK(150PSI) | φ400×1670-2.5"top, 16"*65"-2.5" NPSM | 1 | |
| 2. Top & bottom strainers | Adapted for tank 16"*65"-2.5" NPSM | 1 | ||||
| 3. Control valve | 2750ST | 1 | ||||
| 3.Resin, 001*7 | 25 L/bag | 6 | ||||
| 4. Brine tank, with all accessories | 200L | 1 | ||||
| 5, Brine valve | 434 | 1 | ||||
| 5 | 3-5T/H | 1. FRP TANK(150PSI) | φ530×1750-4"top, 21"*69"-4" NPSM | 1 | ||
| 2. Top & bottom strainers | Adapted for tank 21"*69"-4" NPSM | 1 | ||||
| 3. Control valve | 2750ST | 1 | ||||
| 3.Resin, 001*7 | 25 L/bag | 11 | ||||
| 4. Brine tank, with all accessories | 200L | 1 | ||||
| 5, Brine valve | 434 | 1 | ||||
| 6 | JF-2850ST | 6-8T/H | 1. FRP TANK(150PSI) | φ600×1850-4"top, 24"*72"-4" NPSM | 1 | |
| 2. Top & bottom strainers | Adapted for tank 24"*72"-4" NPSM | 1 | ||||
| 3. Control valve | 2850ST | 1 | ||||
| 3.Resin, 001*7 | 25 L/bag | 14 | ||||
| 4. Brine tank, with all accessories | 350L | 1 | ||||
| 5, Brine valve | 454 | 1 | ||||
| 7 | 8-12T/H | 1. FRP TANK(150PSI) | φ750×1850-4"top, 30"*72"-4" NPSM | 1 | ||
| 2. Top & bottom strainers | Adapted for tank 30"*72"-4" NPSM | 1 | ||||
| 3. Control valve | 2850ST | 1 | ||||
| 3.Resin, 001*7 | 25 L/bag | 21 | ||||
| 4. Brine tank, with all accessories | 500L | 1 | ||||
| 5, Brine valve | 454 | 1 | ||||
| 8 | JF-2900ST | 8-12T/H | 1. FRP TANK(150PSI) | φ750×1850-4"top, 30"*72"-4" NPSM | 1 | |
| 2. Top & bottom strainers | Adapted for tank 30"*72"-4" NPSM | 1 | ||||
| 3. Control valve | 2900ST | 1 | ||||
| 3.Resin, 001*7 | 25 L/bag | 21 | ||||
| 4. Brine tank, with all accessories | 500L | 1 | ||||
| 5, Brine valve | 454 | 1 | ||||
| 9 | 12-18T/H | 1. FRP TANK(150PSI) | φ900×2400-4"top, 36"*94"-6"F | 1 | ||
| 2. Top & bottom strainers | Adapted for tank 36"*94"-6"F | 1 | ||||
| 3. Control valve | 2900ST | 1 | ||||
| 3.Resin, 001*7 | 25 L/bag | 37 | ||||
| 4. Brine tank, with all accessories | 1000L | 1 | ||||
| 5, Brine valve | 454 | 1 | ||||
| 10 | JF-3150ST | 12-18T/H | 1. FRP TANK(150PSI) | φ900×2400-4"top, 36"*94"-6"F | 1 | |
| 2. Top & bottom strainers | Adapted for tank 36"*94"-6"F | 1 | ||||
| 3. Control valve | 3150ST | 1 | ||||
| 3.Resin, 001*7 | 25 L/bag | 37 | ||||
| 4. Brine tank, with all accessories | 1000L | 1 | ||||
| 5, Brine valve | 454 | 1 | ||||
| 11 | 15-22T/H | 1. FRP TANK(150PSI) | φ1000×2400-4"top, 40"*94"-6"F | 1 | ||
| 2. Top & bottom strainers | Adapted for tank 36"*94"-6"F | 1 | ||||
| 3. Control valve | 3150ST | 1 | ||||
| 3.Resin, 001*7 | 25 L/bag | 45 | ||||
| 4. Brine tank, with all accessories | 1500L | 1 | ||||
| 5, Brine valve | 454 | 1 | ||||
| 12 | 22-28T/H | 1. FRP TANK(150PSI) | φ1200×2400-4"top, 48"*94"-6"F | 1 | ||
| 2. Top & bottom strainers | Adapted for tank 48"*94"-6"F | 1 | ||||
| 3. Control valve | 3150ST | 1 | ||||
| 3.Resin, 001*7 | 25 L/bag | 55 | ||||
| 4. Brine tank, with all accessories | 2000L | 1 | ||||
| 5, Brine valve | 454 | 1 | ||||
| 13 | JF-3900ST | 22-28T/H | 1. FRP TANK(150PSI) | φ1200×2400-4"top, 48"*94"-6"F | 1 | |
| 2. Top & bottom strainers | Adapted for tank 48"*94"-6"F | 1 | ||||
| 3. Control valve | 3900ST | 1 | ||||
| 3.Resin, 001*7 | 25 L/bag | 55 | ||||
| 4. Brine tank, with all accessories | 2000L | 1 | ||||
| 5, Brine valve | 454 | 1 | ||||
| 14 | 22-28T/H | 1. FRP TANK(150PSI) | φ1500×2400-4"top, 60"*94"-6"F | 1 | ||
| 2. Top & bottom strainers | Adapted for tank 60"*94"-6"F | 1 | ||||
| 3. Control valve | 3900ST | 1 | ||||
| 3.Resin, 001*7 | 25 L/bag | 80 | ||||
| 4. Brine tank, with all accessories | 2000L | 1 | ||||
| 5, Brine valve | 454 | 1 |
GB/T18300—— definitions and terminology (continued)
downstream regeneration fixed bed: when running and regenerating,
both the water flow and the regenerated liquid are top-down
exchangers through ion exchange resin layers.
Countercurrent Regeneration Fixed Bed: The water flows from top to
bottom through the ion exchange resin layer during operation, and
the regenerated liquid flows from bottom to top through the ion
exchange resin layer exchanger.
Floating bed: When running, water flows from bottom to top through
the ion exchange resin layer, which is suspended in the upper part
of the exchanger because of the action of the upward flow.
GB/T18300—— technical requirements
A , exchanger machine requirements
exchanger design for industrial water softening treatment shall
comply with GB/T 50109 requirements. Switch design documents shall
include at least design drawings, process design calculations,
installation instructions, the design unit shall be responsible for
the correctness and completeness of the design documents.
exchanger design pressure shall not be less than 0.6 MPa.
The height of the ion exchange resin layer in the exchanger shall
be determined according to the operation period, raw water quality
and effluent quality requirements. The height of fixed bed ion
exchange resin layer for soft water treatment of industrial
equipment should not be less than 800 mm; and the height of
floating bed ion exchange resin layer should not be less than 1200
mm..
the downstream regeneration and countercurrent regeneration fixed
bed ion exchanger shall have a 40%~50% backwash expansion height of
the resin height; the floating bed shall have a water cushion of
100~200 mm.
The upper and lower water distributor should be installed in the
exchange tank, and the water distribution should be uniform and do
not produce bias flow.
Choose different levels according to your situation
Standard export carton packing.
7-20 days after confirming order,detail delivery date should be
decided according to
production season and order quantity.
Company Information
Guangzhou Jieming Water Treatment Equipment Co.,Ltd. is a one-stop purchasing, exporting, delivering service provider in Water industry field, located in ,Xintang town, Zengcheng, Guangzhou,China.
Facilitated with the largest manufacturer of FRP Tank---Dongguan Huayu Jieming FRP Vessle Co.,Ltd.(the founder’s co-owned factory), and plentiful manufacturers of water treatment products in China, we provide the most cost- effective products and considerately customized service for our customers like Engineering Company /Water treatment product distributor and Users in water treatment industry all over the world.
Our Services
