|
[China]
Trade Verify
Address: B5 Chao Yang Factory, Caohu Industrial Park, Xiangcheng Economic Development Zone, Suzhou, Jiangsu Province P.R.C
Contact name:Matt Liang
Suzhou Alpine Flow Control Co., Ltd |
|
Verified Suppliers
|
|
|
Expory Coated DN200 Sewage Air Release Valve Without Spill SS316 Interal Parts
Description:
. Advanced design with simple mechanism, strong float to stop
cracking during water hammer & quick closure.
. Aerokinetic mechanism to resist blow shut under higher air
velocity even up to sonic velocity of air.
. With special fat body design to lower the sewage 7water flow
speed, and let the air out but keep sewage water underneath.
. Keep dirty or corrosive liquid inside the body for safety during
operation.
. No harm to human and surrounding environment.
. Internal body guide and upper round wall keep float moving on its
rail and keep liquid turbulence flow within this area.
. Much bigger air flow through the nozzle even for higher viscosity
liquid.
. Outside screen will be an option for safety and prevent insects
or birds from coming in.
. Production standard meets BS EN 1074-4, AWWA C512. Flange
drilling and dimension meets BS EN 1092 and ANSI flange.
Service Fields:
For sewage water system.
Technical Data:
Size range: DN 50-200MM
Pressure ratings:1.0Mpa,1.6Mp (Flange)
Working temperature: -10°-80°C.
Flow media: sewage water.
Please consult factory for PN25 and antishock device whenever there
is waterhammer issue.
| Quick Selection Table | |||||
| Water Flow Rate CMH | 1360 | 4160 | 8500 | 19100 | 33400 |
| Main pipe size MM | 80-400 | 400-700 | 750-1000 | 1050-1500 | 1500-2000 |
| Size of SKAR MM | 50 | 80 | 100 | 150 | 200 |
Material:
