Active Member
|
[China]
Address: No.9 of ZHONG OU ZHI ZAO PORT OF TIAN JI ROAD, HIGH-TECH ZONE, JINAN CITY, CHINA
Contact name:Linda
SHANDONG WAMI CNC TECHNOLOGY CO.LTD |
|
|
4000 * 2000 mm water jet cutting machine save your 70% cutting cost
full automatic glass art cnc water jet cutter
Water jet cutter quik details:
1. Pump:420MPA intensifier pump
2. Adopt industrial PC
3. save 70% cutting cost
Features and advantages of our water jet cutter:
1. Wide cutting range:It can cut most materials, such as metal,
marble, glass, etc.
2. Good cutting quality:Smooth incision, will not produce rough,
burr edges.
3. No heat processing:Because it uses water and abrasive cutting,
there is no heat (or very little heat) during processing. This
effect is ideal for materials affected by heat. Such as: titanium.
4. Environmental protection:This kind of machine uses water and
sand to cut. This kind of sand does not produce toxic gas during
the processing process, and can be discharged directly, which is
more environmentally friendly.
5. No need to change tools；You don't need to replace the cutting
machine device, one nozzle can process different types of materials
and shapes, saving cost and time.
6. Reduce burrs;Waterjet cutting with abrasive sand has fewer
burrs.
Water jet cutter advantage:
1. Fast programming:The program is mainly generated by CAD drawing
software. You can design the line drawing in the layout at will, or
input the DXF file generated from other software. In addition, the
machine supports third-party software, such as nesting nesting
software (used to put graphics in Filling the workpiece can
minimize the loss of the workpiece).
2. Fast programming:The program generated by other software can be
transferred into the machine, it can establish the tool path from
CAD, and can calculate the precise positioning and cutting speed of
the cutter head at more than 2000 points/inch (800 points/cm). What
you need to do Just specify the material and thickness you want to
cut, and leave the other work to the machine to complete.
3. It can be combined with other equipment and can be operated
separately:The water jet cutter can be combined with other
processing equipment (such as drilling heads) to make full use of
its performance and optimize the degree of material utilization.
4. Reduce the number of adjustments:The workpiece can be fixed with
only a small side pressure, reducing the trouble caused by
complicated clamping.
5. No restriction on cutting direction → Various cutting shapes can
be completed.
6. The generated horizontal and vertical forces are extremely small
→ The setting time and the cost of using fixtures can be reduced.
7. The drilling and cutting functions can be completed with the
same machine → process time and cutting cost can be reduced.
FAQ:
1. What are the benefits of purchasing a water jet cutting machine
comparing EDM, Laser, Plasma or Machine tool?
| Requirements | Waterjet | EDM | Laser | Plasma | Machine tools |
| Cost and time efficient | Yes | No | Yes | Yes | No |
| High tolerance, precise cutting | Yes | Yes | Yes | No | No |
| No burned edges, no HAZ | Yes | No | No | No | Yes |
| Multi-head cutting | Yes | No | Yes | No | Yes |
| Steel is over 150mm thickness | Yes | Yes | No | Yes | Yes |
| No distortion or discoloration | Yes | Yes | No | No | Yes |
| Nesting yield | Yes | Yes | Yes | No | No |
| Shiny, mirror finish | Yes | Yes | No | No | Yes |
| Brittle,soft or hard material | Yes | Yes | Yes | Yes | No |
| Stainless steel, copper, brass or exotic material | Yes | Yes | No | Yes | No |
| No toxic fumes, deposits, or carbon buildup | Yes | No | No | No | No |
| Environmentally friendly | Yes | No | Yes | Yes | No |
2. What kind of material does your water jet cutting machine can
cut?
There are plenty materials our water jet cutting machine can cut,
such as stone, ceramic, quartz, glass, foam, plastic, rubber,
copper, brass, aluminum, mild steel, pre-hardened steel, titanium,
inconel and hastalloy
3. What's your cnc water jet cutting machine's max.cutting
thickness?
Generally speaking, if cut steel the max thickness of our water jet
cutting machine can be up to 240mm, but we suggest cut not more
than 150MM for smooth cutting. now our Z axis distance is 170mm, we
can do special for customers.
4. How we supply after-service?
Some countries we have after-service department, we will provide
local service, if have no local service, we will arrange engineer
for overseas installation and training. The installation and
training time is generally 7-10 days. And we also can provide
installation videos.
5. What's your delivery time?
Generally speaking is 30 days. if have stock, 15 days.
6. What is the cutting speed?
| Material | Thickness(mm) | Cutting Speed of 420MPa pump(mm/min) |
| Marble | 20 | 410 |
| Granite | 20 | 380 |
| Glass Bridck | 12 | 1100 |
| Glass | 5 | 1610 |
| Glue Chipped Glass | 10 | 630 |
| Sponge | 50 | 6500 |
| Foam | 50 | 6500 |
| Wood | 10 | 1350 |
| Steel | 2 | 800 |
| Laminates | 10 | 2000 |
| Aluminum | 5 | 970 |
| Copper | 5 | 460 |
| Glass Fibre Reinforced plastic | 2 | 1650 |
Water jet cutting samples:
Company profile:
SHANDONG WAMI CNC TECHNOLOGY CO.LTD is the professional
manufacturer of water jet cutting machine and spare parts for all
Chinese brand water jet cutting machine . our factory is located in
JINAN city, SHANDONG province, China.We have 420Mpa intensifier
pump, 600Mpa intensifier pump ,direct drive pump and 420mpa with
dual intensifier pump, we also can provide 3 axis , 5 axis with 10
degree and dynamic 5 axis with 60 degree cutting head water jet
cutting machine, pure water cutting and abrasive sand cutting. our
machines are with excellent quality - efficient and accuracy,
economical investment with low initial cost and low maintenance
cost to our customers. All the machinery delivered by us come with
first class after-sale service. All machines are with one-year
warranty of main parts, whole-life after-service for the entire
machine.We can supply water jet cutting machine according to your
requests,from the cutting table size to the special design .
Especially our new design of automatic abrasive sand removing
system bring convenience for glass and marble factories. this
system can fit for any brand water jet cutting machine. you needn't
stop the machine while it is working.Our new FLOW type cutting head
can improve you 10% cutting efficiency, and our new technology can
make the machine moving speed to30-50m/min so that reduce you
15%-50% cutting cost according to the materials.Until now We have
expanded our market to North America, Australia, Southeast Asia,
Central Asia and the Middle East. And establish a good relationship
with our customers in Russia, Argentina, America, Canada, UK,
Chile, South Africa, Ecuador,Kuwait, Hungary ,Saudi Arabia ,
Vietnam, Turkey,Mexico,Malaysia ,Australia and other countries and
regions.
