60000psi Direct Drive Pump Sheet Metal Water Jet Cutter 0.1mm Cutting Accuracy

3 AXIS 1500 * 1500 mm small Abrasive water jet cutting machine with 60000 psi direct drive pump water jet cutter 
 
Our water jet cutter specification:
 

 
 
Classification of water jet cutter :
 
1. Divided by sand addition: water cutting is divided into two methods: no sand cutting and sand cutting.
 
2. Divided by equipment: Divided into large water cutting machine, small water cutting machine, three-dimensional water cutting machine, dynamic water cutting machine.
 
3. Divided by pressure: divided into high pressure type and low pressure type, generally with 100MPa as the limit. Above 100MPa is a high-pressure type, and below 100MPa is a low-pressure type. And above 200MPa is ultra high pressure type.
 
4. Divided by technical principles: divided into pre-mixed and post-mixed.
 
5. Divided into safe cutting: divided into safe cutting and non-safe cutting, the difference is mainly in the water pressure, low pressure water cutting below 100MPa can be used in special industries such as: hazardous chemicals, petroleum, coal, hazardous materials treatment, etc. aspect
 
Water jet cutter cutting material:
 
The ultra-high pressure waterjet can cut all kinds of thick and hard materials: such as stainless steel, aluminum, copper, steel, marble, alloy metal, glass, plastic, ceramics, tiles and various visible materials.
 
Water jet cutte cutting accuracy:
 
The accuracy of cutting workpieces is between 0.1mm and 0.25mm. The accuracy of the workpiece is determined by the accuracy of the machine, the size and thickness of the workpiece to be cut.
 
Water jet cutte kerf width:
 
It depends on the size of the cutting material and the nozzle used. Generally speaking, the incision of sand cutting is about 1.0mm to 1.2mm. As the diameter of the sand knife tube expands, the incision becomes larger.
 
Water jet cutte cutting bevel:
 
The cutting speed of the operation determines the quality of the bevel. Most of the single-sided bevels with good cutting quality are about 0.1mm.
 
Features of water jet cutting machine-water jet:
 
1. No thermal deformation during cutting, avoiding physical and chemical changes of materials
 
2. It is widely adapted to the cutting process of various materials and has the reputation of "universal cutting machine"
 
3. The cut is smooth and flat without burrs, and generally does not need to be reprocessed;
 
4. Operated by the numerical control system, with high cutting precision;
 
5. The cutting seam is less than 1.2mm, which is convenient for nesting cutting and saving materials;
 
6. The processing process will not produce waste that pollutes the environment.
 
7. No thermal deformation, no burrs, and no secondary processing.
 
8. CNC waterjet is ideal or the only processing method for materials that are difficult to cut by other methods, such as aramid, titanium alloy and various composite materials.
 

 
Water jet cutter cutting samples:
 

 
After-sales Service:
 
1. Field maintenance and repair service,
 
2. Online support, Field installation, commissioning and training, Video technical support
 
3. Free spare parts.
 
4. We have exported to more than 20 countries yet, and now have agent in America, Russia,South Africa,Ecuador,UK,Argentina,Chile,Mexico,Austrilia,Saudi Arabia and other GCC countries, Malaysia,Vietnam. we can arrange engineers go to customer's factory if no agents in their country.