014235-1 Water Jet Cutting Head Assembly Waterjet Spare Parts

014235-1 Water Jet Cutting Head Assembly for CNC Abrasive Waterjet Cutting Machine water jet cutter parts

Product Description:

Reasons for abnormal damage of waterjet cutter head:

One situation is that the user saves the cutter head and uses the cutter head to the limit, resulting in accelerated wear of the cutter seat. Another situation is that the tool holder continues to be used after it reaches the wear limit. This practice will cause the normal working condition of the tool head to be destroyed and cause abnormal damage such as eccentric wear and breakage of the tool head.

1. Abnormal damage caused by cleaning operations

When cleaning the bottom of the bridge, due to the different depths of the steel bars laid on the bridge deck, it is easy to mill the steel bars during milling, causing the tip of the cutter tip to collapse, the cutter tip to break from the tool holder, or the cutter seat to fall off . Seriously, the steel bars can be wrapped around the milling drum for a week, causing the milling drum to jam, causing the engine to automatically shut down due to overload or causing damage to other components.

2. Abnormal damage during urban road operation

When asphalt was added on urban roads earlier, some manhole covers were not lifted and were still buried under the asphalt pavement. When performing road maintenance and milling operations, because the asphalt layer of this type of road is not thick, generally 4cm, it is very easy to plan the manhole cover by the milling drum, which directly causes part of the cutter head to break, and severely causes the cutter seat to fall off. The clinker belt will also be cut.

3. The wear of the throwing plate leads to the wear of the cutter head and other parts

The throwing board cannot remove the waste material from the milling room in time, so the waste material in the milling room will continue to rub against the cutter head holder; and because there are more waste materials inside, the effect of the spray device will be greatly reduced. , It exacerbates the wear. At the same time, due to the decrease in the working efficiency of the material thrower, the accumulation of waste will also form resistance to the forward direction of the milling machine, causing the crawler belt to slip and the crawler shoe wear and tear.

other reasons:

The failure of the cooling spray device causes the temperature of the cutter head to rise and the wear and tear to increase; when milling concrete roads, the cutter head is chipped and broken due to the excessive speed; when the work is stopped, the milling drum is not cleaned, and the cutter head and the cutter are not cleaned. The gap between the seats is full of waste. When the work starts next time, due to the condensation of the waste and other reasons, the cutter head cannot rotate, causing partial wear.

014235-1 Water Jet Cutting Head Assembly for CNC Abrasive Waterjet Cutting Machine water jet cutter parts:

Company profile:

Shandong WAMIT CNC Technology Co., Ltd strive to supply China top quality water jet cutting machine for all over world customer. We are specialized in R&D,manufacturing, sales and technical services of ultra high pressure water jet cutting systems and relative parts. Our water jet

cutting machine is widely used in stone industry, glass industry, metal industry, composite materials(plastic, rubber, acrylic,

foam), food industry and so on.

Main product are:

1. 60000psi intensfier pump

2. 80000psi and 90000psi intensifier pump

3. 60000psi direct drive pump

4. Waterjet spare parts

5. Abrasive sand removal system

6. 3 axis and 5 axis water jet cutting machine