A-0264-112 60K Intensifier High Pressure Pump Parts Snap Ring

A-0264-112 For Water Jet Cutting Machine High Pressure 60K Intensifier Pump Parts Snap Ring Waterjet Pump Parts

A-0264-112 High Pressure 60K Intensifier Pump Parts Snap Ring description:

Will you do regular physical examinations for your waterjet cutting machine?

People need to have a full body check within a period of time to see if there is a medical history to ensure our health. It is also called periodic inspection in the machine. Machines and humans are the same. It is necessary to take such inspection steps to prevent avoidable mistakes and mistakes in the work. So how to deal with and eliminate the failure of the water cutting machine? Let's see.

When the equipment is not used for a long time, the water jet cutting machine should be well maintained and maintained. First of all, the inlet, outlet and water supply pipes of the power supply should be removed, and all water in the flow channel should be drained, including the pump head cavity and the inlet water tank. The hose is wrapped around the winch or coiled and placed correctly. Clean the inside and outside of the main pump, and grease the rusty surface of the pump body to prevent rust. All scattered peripheral equipment has been cleaned, sorted and placed correctly. Those greases that may rust need to be lubricated or immersed in oil. If necessary, you can manually shake or jog it to make it flow through all overcurrent components. Fill the pump head cavity with engine oil or corrosion inhibitor to prevent rust. All equipment should be placed in a ventilated and dry place indoors and covered with canvas. The main engine pump should be checked regularly every month, and should be manually shaken once during the check, and again when necessary. Comprehensive anti-rust treatment. After the pump is started or in normal operation, if a fault is found, it will react abnormally. Identifying these anomalies and the causes of failures, and understanding some simple troubleshooting methods can save time and minimize operational losses. The abnormal phenomenon after the equipment failure, the cause of the failure and the treatment method are briefly described as follows: The steering of the pump does not meet the requirements. Since the phase of the motor wiring is incorrect, only the phase of the input wiring needs to be changed. The pump cannot start. You must first check the power supply and wiring, and then check whether the switch contacts and other components in the electric control cabinet are burned out. The heart should be electrocuted during the examination. Not only when troubleshooting the waterjet, but also when troubleshooting other machines.

A-0264-112 For Water Jet Cutting Machine High Pressure 60K Intensifier Pump Parts Snap Ring Waterjet Pump Parts: